Revit Architecture

Reply
Member
z.galic
Posts: 5
Registered: ‎02-28-2014
Message 1 of 5 (277 Views)
Accepted Solution

Opening's tag not fit to my needs

277 Views, 4 Replies
03-01-2014 02:38 AM

I would like to make window's tag as shown in attached picture. But when I did it in Revit, depending of windows direction, tag behaves strange (orientation is wrong, circle with the position number is not connected with the window, ...).

 

Does anybody know solution?

 

Thanks

 

Zvezdana

This kind of family needs 2 types, Type A and Type B. If you put the tag on the project, and the tag looks wrong in regards to the window, then you change the tag from Type A to Type B or vice versa. Use the tag without a leader. There should be a set of labels and line on both sides (up and down) in the family.

 

 

3-3-2014 10-30-28 AM.jpg

*Expert Elite*
Alfredo_Medina
Posts: 2,821
Registered: ‎06-11-2009
Message 2 of 5 (246 Views)

Re: Opening's tag not fit to my needs

03-01-2014 05:49 AM in reply to: z.galic

Perhaps you should post the family that you have done so far, not just the image.

-----------------------------------------------------------------------------------------------------------------
Planta1 Revit Online Consulting | info@planta1.com | my Twitter | The Planta1 Blog
Member
z.galic
Posts: 5
Registered: ‎02-28-2014
Message 3 of 5 (192 Views)

Re: Opening's tag not fit to my needs

03-03-2014 02:03 AM in reply to: z.galic

Here you are...

 

*Expert Elite*
Alfredo_Medina
Posts: 2,821
Registered: ‎06-11-2009
Message 4 of 5 (165 Views)

Re: Opening's tag not fit to my needs

03-03-2014 07:42 AM in reply to: z.galic

This kind of family needs 2 types, Type A and Type B. If you put the tag on the project, and the tag looks wrong in regards to the window, then you change the tag from Type A to Type B or vice versa. Use the tag without a leader. There should be a set of labels and line on both sides (up and down) in the family.

 

 

3-3-2014 10-30-28 AM.jpg

-----------------------------------------------------------------------------------------------------------------
Planta1 Revit Online Consulting | info@planta1.com | my Twitter | The Planta1 Blog
Member
z.galic
Posts: 5
Registered: ‎02-28-2014
Message 5 of 5 (128 Views)

Re: Opening's tag not fit to my needs

03-04-2014 05:53 AM in reply to: Alfredo_Medina

Thank you very much!

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.