Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
... but can't seem to do it easily. For instance, I'd like to create a simple reference line parallel, and a few inches above, a shed roof surface. I will use this line to mount a solar panel to the roof. I don't want to mount the solar panel flush with the roof, but a few inches above. I will then attach to roof with a bracket assembly (which I hpe to create).
Use a reference plane form an elevation view, created as an offset from the slope of the roof, and locked with a fixed dimension to keep it parallel to the slope of the roof.
Alfredo Medina _________________________________________________________________ ______ Licensed Architect (Florida) | Freelance Instructor | Autodesk Expert Elite (on Revit) | Profile on Linkedin
