Revit Architecture

Reply
New Member
1007919
Posts: 1
Registered: ‎09-25-2012
Message 1 of 4 (335 Views)

my building is gray - Why

335 Views, 3 Replies
09-25-2012 02:04 AM

Hello ...

I have this project that creates some problems. We are a team so we work with local files and central files. there are 5 local files, and a central file on a network drive, all PCs running LAN connection (not WiFi)

All run Revit 2013


problems:
First As you can see in the picture is a large part of the building gray and some are not, why?
Second wall down the run is on a one 3D view but not on others.
3rd The wall of Question 2 is not in the plans

Alumni
subsales
Posts: 59
Registered: ‎10-01-2008
Message 2 of 4 (315 Views)

Re: my building is gray - Why

09-25-2012 03:30 AM in reply to: 1007919

Hi,

most comen thing here are the phase settings.

check the view settings for the relevant view, which phase the view is on and the phase filter.

 

Regards, Kirstin

*Expert Elite*
LisaDrago
Posts: 1,377
Registered: ‎05-08-2009
Message 3 of 4 (294 Views)

Re: my building is gray - Why

09-25-2012 07:37 AM in reply to: 1007919

The First thing I would look at is the wall you are using and that a material has been established and not just the default.

Second I would check to make sure the exterior side of the wall was really on the 'outside' - the quickest way to check this is to pick a wall and the side with the double arrow (flip arrows) is the exterior side.

 

I would start there and if those are all good - I would go to the phasing and visibility graphics.

 

Let us know what you find.

LD

 


If this helped solve your issue - remember to 'accept as solution' to help other find answers!
You can't think AutoCAD and run Revit.
Email: LisaDragoEE@gmail.com
New Member
AUTO001519
Posts: 1
Registered: ‎09-24-2012
Message 4 of 4 (290 Views)

Re: my building is gray - Why

09-25-2012 07:43 AM in reply to: 1007919

Check VG Wall category Projection/surface pattern

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.