Revit Architecture

Revit Architecture

Reply
tys
Member
3 Posts
0 Kudos
Registered: ‎12-03-2013
Post 1 of 5
Accepted Solution

Moving objects vertically in 3d view

1966 Views, 4 Replies
12-03-2013 04:43 AM

Can anyone please let me know if there is a way to move objects in vertical direction (z-axis) in 3d views, without having to turn the view everytime to be of frontal direction. I would like to move entire objects - for example mass objects - up or down directly in a 3d view of random orientation, now only top- or bottom face can be moved vertically, the whole object moves only on xy -plane. Can vertical movement of an object be done intuitively graphically and/or can it be be numerically, feeding coordinates?

 

Have tried all sources, but cannot find solution, and refuse to believe that Revit would be the only 3d/bim software on planet where direct vertical manipulation of objects is not possible.

 

Thanks a lot in advance!

Thanks for this. It helps a bit, but does not really offer the flexibility I was looking for. The offset seems to get undone when the mass is being edited, and the offset function is not available for objects, which are members of a bigger mass complex. It seems there is no shortcut key or any other way, to change and lock the movement to vertical direction in 3d views (apart from frontal views), correct?
*Expert Elite*
914 Posts
148 Kudos
Registered: ‎04-08-2008
Post 2 of 5

Re: Moving objects vertically in 3d view

12-03-2013 05:56 AM in reply to: tys

You could change the "Offset from level" value in the properties of the mass.

Ross Kirby
BIM Manager
Arcturis
tys
Member
3 Posts
0 Kudos
Registered: ‎12-03-2013
Post 3 of 5

Re: Moving objects vertically in 3d view

12-03-2013 12:05 PM in reply to: rosskirby
Thanks for this. It helps a bit, but does not really offer the flexibility I was looking for. The offset seems to get undone when the mass is being edited, and the offset function is not available for objects, which are members of a bigger mass complex. It seems there is no shortcut key or any other way, to change and lock the movement to vertical direction in 3d views (apart from frontal views), correct?
Member
4 Posts
0 Kudos
Registered: ‎11-13-2002
Post 4 of 5

Re: Moving objects vertically in 3d view

12-04-2013 01:07 AM in reply to: tys

In a 3D view, if you select the move tool, by default, it will allow you to move objects in the X and Y coordinates, but there is a way to move objects in the Z coordinate, click on one of the view cube elevations, you will still be in a 3D view, looking at it from a side, and youwill be able to move the objects in the Z coordinate, as soon as you orbit, you will be back on the X and Y coordinates.

tys
Member
3 Posts
0 Kudos
Registered: ‎12-03-2013
Post 5 of 5

Re: Moving objects vertically in 3d view

12-04-2013 05:12 AM in reply to: tys
thanks, this I am already aware of, but it is frustrating always having to switch between axo and elevational viewing directions..It seems vertical manipulation is just less intuitive than yx directions in revit.

Toni Yli-Suvanto
Dipl Arch ETH SAFA

Toimitusjohtaja


ARKKITEHTITOIMISTO TONI YLI-SUVANTO OY
Toni Yli-Suvanto Architects - sustainable architecture for new and renovation projects. Address: Laivalahdenkaari 34 00810 Helsinki. Telephone: +358 40 7411 307. Emal: info@toniylisuvanto.com Website: www.toniylisuvanto.com
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Are you interested in helping shape the future of the Autodesk Community? To participate in this brief usability study, please click here. Your time and input is greatly appreciated!