Revit Architecture

Reply
Active Member
cadmansteve
Posts: 8
Registered: ‎10-02-2006
Message 1 of 3 (164 Views)

Moving a cutrain wall

164 Views, 2 Replies
12-04-2012 04:50 PM

I am trying to align the curtain wall with the edge of the concrete slab/face of wood framed wall (Core).  I have tried to align and move however the whole wall moves as well as the edge of the slab. Any idea on how I can move the Curtain wall leaving the other elements in place?

Active Contributor
kentw
Posts: 32
Registered: ‎05-14-2012
Message 2 of 3 (155 Views)

Re: Moving a cutrain wall

12-04-2012 06:03 PM in reply to: cadmansteve

What you need to do is select the curtain wall jamb (or mullion as Revit calls it) and choose the edit type button and play with the Offset value until you get the desired result.  You can repeat this with the Curtain Panel.  You may need use the tab button to select the Curtain Panel

 

http://www.screencast.com/t/yeOFcYmalz

 

 

_________________________________________________________________

KarelCAD Application Support Specialist
*Expert Elite*
Alfredo_Medina
Posts: 2,830
Registered: ‎06-11-2009
Message 3 of 3 (150 Views)

Re: Moving a cutrain wall

12-04-2012 06:21 PM in reply to: cadmansteve

You can move the curtain wall without moving the adjacent wall by either one of these methods:

 

  • Move > Disjoin > select the curtain wall > move it.
  • Select the curtain wall > find the blue dot > right click > Disallow join > move the curtain wall.
-----------------------------------------------------------------------------------------------------------------
Planta1 Revit Online Consulting | info@planta1.com | my Twitter | The Planta1 Blog
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.