Revit Architecture

Revit Architecture

Reply
Board Manager
scott.sheppard
Posts: 1,114
Registered: ‎11-13-2006
Message 1 of 5 (1,587 Views)

Maximo Integration for Revit 2013 products Available on Autodesk Labs

1587 Views, 4 Replies
08-15-2012 03:44 PM

The free technology preview of the Maximo® Integration for Autodesk® Revit® 2013 products helps extend the value of a Revit building information model (BIM) into the operations phase of the building lifecycle. Richly attributed data about building assets, that are developed in Revit during the building design and construction phases, can be published directly into Maximo during commissioning or at building "handover," thus supporting more immediate and efficient use of Maximo once the building is occupied. The Revit asset data can be exported in the COBie data specification, if desired. In addition, the BIM/3D asset data can be viewed inside Maximo, in context with Maximo applications and processes.

 

// Download via Autodesk Labs

 

We hope you try it and provide yoru feedback on this thread.



Scott Sheppard
Program Manager
Autodesk Labs
Autodesk, Inc.
Active Contributor
cpennetti
Posts: 40
Registered: ‎08-26-2010
Message 2 of 5 (1,572 Views)

Re: Maximo Integration for Revit 2013 products Available on Autodesk Labs

08-15-2012 07:49 PM in reply to: scott.sheppard

It's great to see this, and i think there are a lot of clients that would be interested in making the most from BIM.  As a civil engineer... one question i have is if there is any chance there could be a similar application or connection from Civil 3D?  Maybe something connected to a Maximo type service, as well as a online mapping or GIS application?

New Member
steven.rowland
Posts: 1
Registered: ‎02-20-2013
Message 3 of 5 (974 Views)

Re: Maximo Integration for Revit 2013 products Available on Autodesk Labs

02-20-2013 02:14 AM in reply to: scott.sheppard

We are starting to look at this, as we are in the middle of a very large project with high requirements for asset coding. Our homemade solution is a custom plugin, but we see big advantages for using an integrated solution. Guiding our clients towards Maximo and 360 Glue would be very good for us, especially with regards to support available from IBM and Autodesk. I will be in touch as we explore a bit deeper!

 

Steven Rowland

White Arkitekter

Stockholm

Board Manager
scott.sheppard
Posts: 1,114
Registered: ‎11-13-2006
Message 4 of 5 (811 Views)

Re: Maximo Integration for Revit 2013 products Available on Autodesk Labs

03-19-2013 03:13 PM in reply to: steven.rowland

We look forward to hearing about your results.



Scott Sheppard
Program Manager
Autodesk Labs
Autodesk, Inc.
Board Manager
scott.sheppard
Posts: 1,114
Registered: ‎11-13-2006
Message 5 of 5 (417 Views)

Re: Maximo Integration for Revit 2013 products Available on Autodesk Labs

08-06-2013 07:03 AM in reply to: scott.sheppard

The technology preview has ended. Thanks to everyone for your participation.



Scott Sheppard
Program Manager
Autodesk Labs
Autodesk, Inc.
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.