Revit Architecture

Revit Architecture

Reply
Contributor
kczege
Posts: 11
Registered: ‎10-17-2012
Message 1 of 8 (681 Views)

material takeoff (schedule) not working?

681 Views, 7 Replies
10-17-2012 01:12 PM

I am working on an IPD project and was about to send out area calculations of the glass panels used in my model when I came to realize that the materials are being calculated per FACE of object, not by area of object. 
example: a glass panel that is 5'-0" x 5'-0" should be 25 sf, but it shows up as what looks like the area of all 6 faces of the object.(above 50 sf)
How and why is this happening? 
How can I create a schedule of materials that makes sense in construction?

:smileysad:

Valued Mentor
mike
Posts: 263
Registered: ‎03-04-2004
Message 2 of 8 (680 Views)

Re: material takeoff (schedule) not working?

10-17-2012 01:16 PM in reply to: kczege

Are you using "Parts" for the Model and extracting from them?

Michael L. Maloney
Virtual World Designs
VDC & BIM Model Design, Clash & Coordination
mike@VirtualWorldDesigns.com
Building Design Suite Ultimate 2013, 2014, 2015
Charlotte, NC ; Fort Mill, SC
Contributor
kczege
Posts: 11
Registered: ‎10-17-2012
Message 3 of 8 (676 Views)

Re: material takeoff (schedule) not working?

10-17-2012 01:22 PM in reply to: mike

No. not using parts. 

I made curtainwall panels and would like to know the quantity of glass within.

*Expert Elite*
Alfredo_Medina
Posts: 2,863
Registered: ‎06-11-2009
Message 4 of 8 (661 Views)

Re: material takeoff (schedule) not working?

10-17-2012 03:31 PM in reply to: kczege

I cannot reproduce the error. If I have a panel that is 5 feet x 5 feet, a material take-off schedule of curtain wall panels reports Material:area = 25 feet, as expected. I am using Revit 2013 OneBox.

-----------------------------------------------------------------------------------------------------------------
Planta1 Revit Online Consulting | info@planta1.com | my Twitter | The Planta1 Blog
Contributor
kczege
Posts: 11
Registered: ‎10-17-2012
Message 5 of 8 (659 Views)

Re: material takeoff (schedule) not working?

10-17-2012 03:33 PM in reply to: Alfredo_Medina

interesting. did you do a material take off on glass and frames in the panel for example? I was not doing a takeoff on the wall itself, but the materials in the panel. sorry if I was not clear.

Contributor
kczege
Posts: 11
Registered: ‎10-17-2012
Message 6 of 8 (654 Views)

Re: material takeoff (schedule) not working?

10-17-2012 03:38 PM in reply to: kczege

Here is a screenshot of an example.

The wall is 12 feet long. The wall area is correct: 120 SF.

There are two curtainwall panels int his wall. There are two layers of glass in each section of each panel, but the materials are not all the same. Some are glass, some are glass with spandrel behind and some are spandrel material. if I scheduel the materials, the quantities are off. it looks like all 6 sides of the object that is used for glass are being calcualted - maybe?

*Expert Elite*
Alfredo_Medina
Posts: 2,863
Registered: ‎06-11-2009
Message 7 of 8 (645 Views)

Re: material takeoff (schedule) not working?

10-17-2012 04:22 PM in reply to: kczege

Not easy to guess what could be without looking at the file. Probably is the way the curtain panel families are made. You said that each panel has double glass, therefore, there are two extrusions, maybe, both with materials. It all depends.

 

Another approach is to introduce two shared parameters in the panel family. Width and Height of panel. With those two values you could schedule the area of each panel more easily.

-----------------------------------------------------------------------------------------------------------------
Planta1 Revit Online Consulting | info@planta1.com | my Twitter | The Planta1 Blog
Product Support
Chris.Aquino
Posts: 413
Registered: ‎06-27-2010
Message 8 of 8 (578 Views)

Re: material takeoff (schedule) not working?

10-23-2012 05:32 PM in reply to: kczege

After some further testing we have not been able to reproduce the behavior you are seeing. If you can, please upload a sample file (like the one the screenshots) with everything purged out, so we can get a better idea of how the panel families are constructed.



Chris Aquino
Knowledge Domain Expert
Customer Service & Support
Autodesk, Inc.


The Revit Clinic
@Revitclinic
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.