Revit Architecture

Revit Architecture

Reply
Mentor
JamaL9722060
Posts: 1,311
Registered: ‎04-09-2010
Message 1 of 3 (801 Views)

Material takeoff: As paint and other related calculations

801 Views, 2 Replies
10-25-2012 01:16 AM

Material takeoff: As paint and other related calculations

 

  1. I’m wondering why no values where calculated for the field “Material: as paint”!

 

  1. As for the “area” and “volume” calculation, they sound to be false, for example, the area of plaster board should be 0.02*1.84 but not 0.32*1.84!!!!!

What might be false there?

 

 

Thank you for the help,

 

Best

 

Jamal

 

Clip_255.jpg

----------------------------------------------------------
Jamal NUMAN, GIS and Civil Engineer, MSc
e-mail: JamaL9722060@yahoo.com
P.O.Box: 731, Ramallah, West Bank, Palestine.
----------------------------------------------------------
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
*Expert Elite*
Alfredo_Medina
Posts: 2,819
Registered: ‎06-11-2009
Message 2 of 3 (795 Views)

Re: Material takeoff: As paint and other related calculations

10-25-2012 03:37 AM in reply to: JamaL9722060
  • The areas of the materials are calculated multiplying the length of the core lines times the height of the wall, minus the area of the openings.
  • The Length parameter shows the length of the core line of each line, not the length of the exterior of the wall, but the length of the core considering intersections with other walls, such as in this corner. 
  • Materials have waste in the field, so a good approximation is good enough.
  • The "width" parameter that you see (0.32) is the width of the wall, not the width of each of the components. The width of the components is already available in the wall's type properties window.
  • "Material as paint = No" means that this material is a layer in the wall's type properties, not a material applied on the wall with the paint tool.
-----------------------------------------------------------------------------------------------------------------
Planta1 Revit Online Consulting | info@planta1.com | my Twitter | The Planta1 Blog
Mentor
JamaL9722060
Posts: 1,311
Registered: ‎04-09-2010
Message 3 of 3 (782 Views)

Re: Material takeoff: As paint and other related calculations

10-25-2012 05:55 AM in reply to: Alfredo_Medina

 

Many thanks for the elaboration.

 

My issue here is to calculate the volume and area (horizontal and vertical) of each layer of the wall.

 

For example,

 

What is horizontal area of the plaster board? (Should be 0.02*length)

 

What is the vertical area of the plaster board? (Should be length*3)

 

What is the volume of the plaster board? (Should be 0.02*length *3)

 

How these calculations can be obtained automatically from the Revit?

 

Clip_258.jpg

 

 

To understand the way the Revit works, I considered the simple wall below to see how the areas and volume are calculated

 

  • Still, the material: as paint is not calculated
  • What is the difference between Area and Material Area?
  • What is the difference between Volume and Material Volume?

 

Thank you for the help

 

Clip_260.jpg

----------------------------------------------------------
Jamal NUMAN, GIS and Civil Engineer, MSc
e-mail: JamaL9722060@yahoo.com
P.O.Box: 731, Ramallah, West Bank, Palestine.
----------------------------------------------------------
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.