Revit Architecture

Reply
Member
1057583
Posts: 3
Registered: ‎08-16-2012
Message 1 of 5 (498 Views)
Accepted Solution

Louvre family not showing up in elevation

498 Views, 4 Replies
08-16-2012 02:38 AM

Hi. My concern is regarding a louvre family i am placing on walls in a multi-storey commercial project. They are viewable in 3d mode and Floor plan view but when i switch to elevation, all i get are holes in the walls where the louvre should be sitting. Any help would be an appreciated. This louvre family is from Breezway and i am getting the same result with all Breezway family members i have downloaded.

 

Shandor Fahrenfort

sfahrenfort@hotmail.com

The family has the louvers set to not display at course level of detail.  if you change the detail level of the view the louvers will show up.

 

detail_level.png

Employee
loboarch
Posts: 983
Registered: ‎09-05-2003
Message 2 of 5 (482 Views)

Re: Louvre family not showing up in elevation

08-16-2012 06:45 AM in reply to: 1057583

Looks like there is a bad visibility setting in the family.  Post the RFA file so someone can take a closer look.



Jeff Hanson
Sr. Subject Matter Expert
Autodesk, Revit User Experience
Member
1057583
Posts: 3
Registered: ‎08-16-2012
Message 3 of 5 (461 Views)

Re: Louvre family not showing up in elevation

08-16-2012 09:04 PM in reply to: loboarch

These are the louver family files I am using with Revit 2012. If there is a fix please let me know it in case I come across the problem again. Thanks.

Employee
loboarch
Posts: 983
Registered: ‎09-05-2003
Message 4 of 5 (438 Views)

Re: Louvre family not showing up in elevation

08-17-2012 11:15 AM in reply to: 1057583

The family has the louvers set to not display at course level of detail.  if you change the detail level of the view the louvers will show up.

 

detail_level.png



Jeff Hanson
Sr. Subject Matter Expert
Autodesk, Revit User Experience
Member
1057583
Posts: 3
Registered: ‎08-16-2012
Message 5 of 5 (418 Views)

Re: Louvre family not showing up in elevation

08-18-2012 04:24 AM in reply to: loboarch

Thanks alot. That fixed it :smileyhappy:

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.