Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
i am having trouble placing light fixtures on lower ceilings in a ceiling plan. i set the ceiling height in the element properties for say 8ft and then in the same room i have a lower ceiling height over for eg a reception counter.
when placing light fixtures on the higher ceiling it works but gives me the "stop" (crossed circle) sign when i attempt same over the lower ceilng.
It's probably your cut plane. Adjust it and/or look in the help file about
Plan Regions.
wrote in message news:5453584@discussion.autodesk.com...
i am having trouble placing light fixtures on lower ceilings in a ceiling
plan. i set the ceiling height in the element properties for say 8ft and
then in the same room i have a lower ceiling height over for eg a reception
counter.
when placing light fixtures on the higher ceiling it works but gives me the
"stop" (crossed circle) sign when i attempt same over the lower ceilng.
