Revit Architecture

Revit Architecture

Reply
Valued Contributor
55 Posts
0 Kudos
Registered: ‎08-01-2005
Post 1 of 3
Accepted Solution

Life to Existing Phase Materials

235 Views, 2 Replies
11-27-2012 09:36 PM

I am having trouble having objects set to 'Phase Created' = Existing to show a desired material.  They are all a dark grey.

 

I have gone into 'Manage', and "Phases" under 'Phasing', and under the tab, 'Graphic Overrides', changed 'Material' for 'Existing to "Phase - New".  But this did not change anything.  (see attached photos)

 

Where else does this get changed?

 

/ Using 2013

Great! Thank you Ricardo.

I wasn't able to find, "by catagory" or "none", but found "No Material" which only seems to exist in this scenario.  (I'll post it for the benefit of others.)

Contributor
12 Posts
0 Kudos
Registered: ‎11-16-2012
Post 2 of 3

Re: Life to Existing Phase Materials

11-28-2012 04:06 AM in reply to: nikana2000
In the Phases graphics change the existing material to none or by category. This will get rid of the material override set by the phase and preserve the materials you have assigned to walls, etc. Ricardo Twitter: @rmaturana
Valued Contributor
55 Posts
0 Kudos
Registered: ‎08-01-2005
Post 3 of 3

Re: Life to Existing Phase Materials

11-28-2012 07:43 AM in reply to: nikana2000

Great! Thank you Ricardo.

I wasn't able to find, "by catagory" or "none", but found "No Material" which only seems to exist in this scenario.  (I'll post it for the benefit of others.)

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post