Revit Architecture

Revit Architecture

Reply
Active Member
fauzi1202
Posts: 7
Registered: ‎01-04-2012
Message 1 of 4 (2,869 Views)
Accepted Solution

join/attached wall to stairs

2869 Views, 3 Replies
01-04-2012 12:52 AM

can or cannot???

please help me....

You could try editing the profile of the wall to exclude the area of the stairs (from an elevation or section view).

Product Support
Lance.Coffey
Posts: 387
Registered: ‎05-14-2010
Message 2 of 4 (2,849 Views)

Re: join/attached wall to stairs

01-05-2012 12:06 PM in reply to: fauzi1202

Stairs will not directly attach (using the Attach Top/Base command) or join (using the Join geometry command) with wall elements. If you are working with straight stairs, you can use a reference plane aligned with the bottom of the stairs, and attach the stairs to the reference plane. Alternatively, you can directly modify the profile of walls to fit with the stairs.

When looking online for the topic of joining walls to stairs, I found the following pages with additional information:
http://forums.autodesk.com/t5/Autodesk-Revit-Architecture/Can-t-join-stairs-with-walls-and-floors/td...
http://forums.autodesk.com/t5/Autodesk-Revit-Architecture/monolithic-stairs-joining-to-walls-and-sla...
http://www.revitcity.com/forums.php?action=viewthread&thread_id=1420
http://www.revitcity.com/forums.php?action=viewthread&thread_id=1074



Lance Coffey
Active Member
fauzi1202
Posts: 7
Registered: ‎01-04-2012
Message 3 of 4 (2,830 Views)

Re: join/attached wall to stairs

01-07-2012 05:27 AM in reply to: Lance.Coffey

thks for the information...

actually i'm build modeling for paint area calculation.....

i need to joint stair with wall because... i need to deduct area from side of wall....

if not ... the area calculation will calculate all the wall surface...

u have any method???:manhappy:

 

p/s: sorry for my bad english language....

(from malaysia)

Product Support
Lance.Coffey
Posts: 387
Registered: ‎05-14-2010
Message 4 of 4 (2,782 Views)

Re: join/attached wall to stairs

01-19-2012 03:42 PM in reply to: fauzi1202

You could try editing the profile of the wall to exclude the area of the stairs (from an elevation or section view).



Lance Coffey
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.