Revit Architecture

Reply
Valued Contributor
DavidRaines
Posts: 81
Registered: ‎09-30-2008
Message 1 of 4 (164 Views)

Jamping Jack Flash

164 Views, 3 Replies
12-03-2012 09:01 AM

Yesterday morning I discovered that when I clicked on a wall. text or anything that element would jump up on the screen.

Has anyone experienced this?

 

Thanks

David

New Member
daithio3
Posts: 1
Registered: ‎12-03-2010
Message 2 of 4 (145 Views)

Re: Jamping Jack Flash

12-04-2012 10:10 AM in reply to: DavidRaines

David,

Ive noticed this on on ocasion when the extents of your model has be exceeded. error.JPG

 

Check that your not getting this error, and also that your Project base point isnt too far away from the centre of your project.

Product Support
fernanda.firman
Posts: 164
Registered: ‎10-07-2011
Message 3 of 4 (122 Views)

Re: Jamping Jack Flash

12-05-2012 10:36 AM in reply to: DavidRaines

Hi David,

 

This type of issue is usualy realted to graphic cards.

 

Here are some things to try:

1. Update your graphic card

http://usa.autodesk.com/adsk/servlet/syscert?siteID=123112&id=18844534

2. Make sure you have the latest update for Revit

3. Turn off Hardware Accelaration - Go to the big "R" on the top left>Options>Graphics

4. Use Revit on the primary monitor , if you are using dual monitor.

 

Hope that helps!

 



Fernanda Lima Firman
Technical Support Specialist
Customer Service & Support
Autodesk, Inc.

Revit Clinic


If this helped solve your issue - remember to 'accept as solution' to help others find answers.
Active Contributor
kentw
Posts: 32
Registered: ‎05-14-2012
Message 4 of 4 (113 Views)

Re: Jamping Jack Flash

12-05-2012 11:34 AM in reply to: DavidRaines
The easy fix for this issue is to un-tick the press and drag tick box down the very bottom right of the application screen. You will still get a flicker but the selected objects will not move. After un-ticking this box when you want to drag something you need to click to select then click and drag.
_________________________________________________________________

KarelCAD Application Support Specialist
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.