Revit Architecture

Valued Contributor
Posts: 70
Registered: ‎09-30-2008
Message 1 of 4 (161 Views)

Jamping Jack Flash

161 Views, 3 Replies
12-03-2012 09:01 AM

Yesterday morning I discovered that when I clicked on a wall. text or anything that element would jump up on the screen.

Has anyone experienced this?




New Member
Posts: 1
Registered: ‎12-03-2010
Message 2 of 4 (142 Views)

Re: Jamping Jack Flash

12-04-2012 10:10 AM in reply to: DavidRaines


Ive noticed this on on ocasion when the extents of your model has be exceeded. error.JPG


Check that your not getting this error, and also that your Project base point isnt too far away from the centre of your project.

Product Support
Posts: 161
Registered: ‎10-07-2011
Message 3 of 4 (119 Views)

Re: Jamping Jack Flash

12-05-2012 10:36 AM in reply to: DavidRaines

Hi David,


This type of issue is usualy realted to graphic cards.


Here are some things to try:

1. Update your graphic card

2. Make sure you have the latest update for Revit

3. Turn off Hardware Accelaration - Go to the big "R" on the top left>Options>Graphics

4. Use Revit on the primary monitor , if you are using dual monitor.


Hope that helps!


Fernanda Lima Firman
Technical Support Specialist
Customer Service & Support
Autodesk, Inc.

Revit Clinic

If this helped solve your issue - remember to 'accept as solution' to help others find answers.
Active Contributor
Posts: 32
Registered: ‎05-14-2012
Message 4 of 4 (110 Views)

Re: Jamping Jack Flash

12-05-2012 11:34 AM in reply to: DavidRaines
The easy fix for this issue is to un-tick the press and drag tick box down the very bottom right of the application screen. You will still get a flicker but the selected objects will not move. After un-ticking this box when you want to drag something you need to click to select then click and drag.

KarelCAD Application Support Specialist
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.