Revit Architecture

Revit Architecture

Reply
Mentor
JamaL9722060
Posts: 1,360
Registered: ‎04-09-2010
Message 1 of 3 (370 Views)
Accepted Solution

How to label all the windows at a time with serial number?

370 Views, 2 Replies
10-01-2012 02:11 PM

How to label all the windows at a time with serial number?

 

I’m wondering if there is a way to label all the windows at a time with serial number.

 

Thank you

 

Best

 

Jamal

 

Clip_59.jpg

 

----------------------------------------------------------
Jamal NUMAN, GIS and Civil Engineer, MSc
e-mail: JamaL9722060@yahoo.com
P.O.Box: 731, Ramallah, West Bank, Palestine.
----------------------------------------------------------
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.

What you need to use is the "Tag All Not Tagged" command (which is shown as "Tag All" on the Ribbon icon), located on the Annotate tab. You can either select a group of elements (which don't all have to be Windows) or you can simply activate the command, which then applies to all elements visible in the current View. A dialog box will appear with a list of available Tags for each Category. Select the Window Tag you want to use, and each Window in the selection range will be Tagged with the selected Tag. If an element is already Tagged, Revit will not Tag it again with this tool.

*Expert Elite*
CADastrophe
Posts: 3,421
Registered: ‎08-28-2009
Message 2 of 3 (348 Views)

Re: How to label all the windows at a time with serial number?

10-03-2012 06:27 AM in reply to: JamaL9722060

What you need to use is the "Tag All Not Tagged" command (which is shown as "Tag All" on the Ribbon icon), located on the Annotate tab. You can either select a group of elements (which don't all have to be Windows) or you can simply activate the command, which then applies to all elements visible in the current View. A dialog box will appear with a list of available Tags for each Category. Select the Window Tag you want to use, and each Window in the selection range will be Tagged with the selected Tag. If an element is already Tagged, Revit will not Tag it again with this tool.

Corey D.                                                                                                                  ADSK_Logo_EE_2013.png    AutoCAD 2014 User  Revit 2014 User
──────────────────────────────────────────────────────────────────────
⁞|⁞ Please use Mark Solutions!.Accept as Solution and Give Kudos!Give Kudos as appropriate to further enhance these forums. Thank you!
Mentor
JamaL9722060
Posts: 1,360
Registered: ‎04-09-2010
Message 3 of 3 (336 Views)

Re: How to label all the windows at a time with serial number?

10-03-2012 02:30 PM in reply to: CADastrophe

Many thanks for the answer. This is very helpful.

 

Best

 

Jamal

 

Clip_85.jpg

----------------------------------------------------------
Jamal NUMAN, GIS and Civil Engineer, MSc
e-mail: JamaL9722060@yahoo.com
P.O.Box: 731, Ramallah, West Bank, Palestine.
----------------------------------------------------------
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.