Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
How to get the corners of storfront windows to be rotated
I tested this with a new mullion profile drawn at 45 degrees and it works; however, the checkbox for "corner mullion" cannot be checked and the two intersecting curtain walls therefore do not treat it as such. Basically, only 1 of the walls are hosting it.
sorry I don't understand
how do I do a new mullion profile?
Also I have 120 degree corner how would that work
--
Dave
wrote in message news:5186058@discussion.autodesk.com...
I tested this with a new mullion profile drawn at 45 degrees and it works;
however, the checkbox for "corner mullion" cannot be checked and the two
intersecting curtain walls therefore do not treat it as such. Basically,
only 1 of the walls are hosting it.
Well, your first question is somewhat easy, but I can only say that after doing it many times. There are many posts and tutorials on this subject, and it has been explained many times on this forum as well as other online resources. AUGI, Revit City, Help, .......
wrote in message news:5186878@discussion.autodesk.com...
Well, your first question is somewhat easy, but I can only say that after
doing it many times. There are many posts and tutorials on this subject,
and it has been explained many times on this forum as well as other online
resources. AUGI, Revit City, Help, .......
Well I'm not seeing it. What should I be searching under?
Maybe a better question is how do I draw this building outline that I've
done in autocad in revit
I'm also having problems getting the curved storefront mullions to line up
properly
--
Dave
wrote in message news:5186878@discussion.autodesk.com...
Well, your first question is somewhat easy, but I can only say that after
doing it many times. There are many posts and tutorials on this subject,
and it has been explained many times on this forum as well as other online
resources. AUGI, Revit City, Help, .......
wrote in message news:5186878@discussion.autodesk.com...
Well, your first question is somewhat easy, but I can only say that after
doing it many times. There are many posts and tutorials on this subject,
and it has been explained many times on this forum as well as other online
resources. AUGI, Revit City, Help, .......
