Revit Architecture

Reply
Active Contributor
smikrut11
Posts: 44
Registered: ‎12-17-2010
Message 1 of 3 (298 Views)

Gutter on curved rood

298 Views, 2 Replies
10-10-2011 11:36 AM

I have a curved roof that need a gutter attached to it. However the gutter will not attach to it. Is there a way to fix this?

Active Contributor
smikrut11
Posts: 44
Registered: ‎12-17-2010
Message 2 of 3 (293 Views)

Re: Gutter on curved rood

10-10-2011 01:01 PM in reply to: smikrut11

Also, why won't a gutter attach to some roofs? I have a straight run of roof where a gutter won't attach.

Active Contributor
mike
Posts: 27
Registered: ‎06-05-2008
Message 3 of 3 (263 Views)

Re: Gutter on curved rood

10-12-2011 01:10 PM in reply to: smikrut11

Gutters only seem to attach to a horizontal roof edge, not sloping for some reason.

We have used a created a fascia with a gutter profile to get around this.

So at the roof edge we have a timber fascia, then the gutter fascia.

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.