Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

ERROR column

1 REPLY 1
Reply
Message 1 of 2
ennujozlagam
269 Views, 1 Reply

ERROR column

Hi Guys,

 

Maybe you could help me with this. Im using Revit 2014 and im trying to put structural Column and beams and always show up this  messages Please see attached. And when i cancelled my column disappear (i have no choice but  just to cancelled it) because i cannot put it. Thank you





Remember : without the difficult times in your LIFE, you wouldn't be who you are today. Be grateful for the good and the bad. ANGER doesn't solve anything. It builds nothing, but it can destroy everything...
Please mark this response as "Accept as Solution" if it answers your question. Kudos gladly accepted.
1 REPLY 1
Message 2 of 2

Have you isolated the two elements in question from the warning dialog to see if you can locate any overlapping boundary edges? You could either select the checkboxes and click Show, or you could note the Element ID numbers and go to Manage > Inquiry > Select by ID and enter them there. Once you see the elements, you could isolate them in your model to see if you can determine where the conflict is. It looks like it might be with the analytical boundaries for the floors, so I would make sure you have the Analytical Floors category turned on - I can't tell if you do or not from the screenshot.



Katie Langan
Technical Support Specialist
Customer Service & Support
Autodesk, Inc.

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Rail Community


Autodesk Design & Make Report