Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Elevation Tags Again

5 REPLIES 5
Reply
Message 1 of 6
Anonymous
848 Views, 5 Replies

Elevation Tags Again

Ok, no luck at the AUGI NG, so I'll try here.
I'm reading the Tags threads, and what I really need is an "Exterior
Elevation Tag" and an "Interior Elevation Tag".
Both require a circle with a horizontal line from quadrant to quadrant. The
Above text is the Elevation No., while the Below text is the sheet number.
The current "single side" arrow is what we use for interior elevations, but
fairly standard architectural annotation symbols uses an arrow that "extends
down" to meet that horizontal line (the extensions continue at 45 degrees
and the horizontal line comes out to meet them, The exterior area gets
filled in like the top arrow.

How can I get this to be my Elevation symbol instead of the single text
single arrow symbol?

--
Regards,
---------------
Reid M. Addis
Registered Architect
Architectural Applications Specialist
Granary Associates
411 North 20th Street
Philadelphia, PA 19130
Ph. 215-665-7056
email: addis@granaryassoc.com
5 REPLIES 5
Message 2 of 6
sbrown
in reply to: Anonymous

can you post an image of what you want it to look like. All the availble properties are found under settings>wiew tags>elevations. Thats the only choices you have.
Message 3 of 6
Anonymous
in reply to: Anonymous

Here they are

--
Regards,
---------------
Reid M. Addis
Registered Architect
Architectural Applications Specialist
Granary Associates
411 North 20th Street
Philadelphia, PA 19130
Ph. 215-665-7056
email: addis@granaryassoc.com
Message 4 of 6
Anonymous
in reply to: Anonymous

What's odd is that the Building Section symbol is what I want to use for the
Building Exterior elevation symbol.
Is there any way to get this to be the default for Exterior Elevations?

--
Regards,
---------------
Reid M. Addis
Registered Architect
Architectural Applications Specialist
Granary Associates
411 North 20th Street
Philadelphia, PA 19130
Ph. 215-665-7056
email: addis@granaryassoc.com
Message 5 of 6
Anonymous
in reply to: Anonymous

Good luck with that, I've already posted on the issue of having the
elevation number inside the circle, above the sheet number, here with no
luck. If you find anything new, please keep us posted.
-Jay

"Reid M. Addis" wrote in message
news:5098216@discussion.autodesk.com...
What's odd is that the Building Section symbol is what I want to use for the
Building Exterior elevation symbol.
Is there any way to get this to be the default for Exterior Elevations?

--
Regards,
---------------
Reid M. Addis
Registered Architect
Architectural Applications Specialist
Granary Associates
411 North 20th Street
Philadelphia, PA 19130
Ph. 215-665-7056
email: addis@granaryassoc.com
Message 6 of 6
Anonymous
in reply to: Anonymous

Ah, words of encouragement.

--
Regards,
---------------
Reid M. Addis
Registered Architect
Architectural Applications Specialist
Granary Associates
411 North 20th Street
Philadelphia, PA 19130
Ph. 215-665-7056
email: addis@granaryassoc.com

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Rail Community


Autodesk Design & Make Report