@Revit3D.com or anyone;
The manufacturer I am currently working for, recently purchased Revit 2011 Architecture and I have been hired to make families / 3D models for their product lines with it. They made inquiries which Revit version they should use and were told Revit Architecture. I used MEP at a former manufacturer but this is a first for me using the Architecture version of Revit.
The electrical shared parameters don't seem to be supported or work as well, as I remember in Revit MEP. I say that because I am getting dialog boxes that say some of them cannot be used. The list I am using came from my former employer’s web site where they have them accessible to the public. Am I correct in my assumption or am I missing something?
I don’t want to get far into this project only to find I actually should be using MEP.
The product line has electric motors, various control boxes, equipment power to the control box, power from the control box out to motors, etc. Users of the product will chose motor speed, gross capacity, and motor HP as some of the main choice options in the type catalog.
My questions include;
Thank you for any information you can provide.
Access a broad range of knowledge to help get the most out of your products and services.
Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.
Upgrading to a 2015 product? Make sure to check these out 1st!