Revit Architecture

Reply
Contributor
BradleyOlsen4775
Posts: 20
Registered: ‎07-16-2009
Message 1 of 4 (1,203 Views)
Accepted Solution

Duplicate Section Callout

1203 Views, 3 Replies
02-14-2011 09:09 AM

I am working on a foundation plan that I would like to place the same section callout at different location long the foundation walls. 

 

Is there a way to duplicate the same section callout? 

 

Thanks.

You are welcome! Anytime i train anyone on Revit - I tell them as soon as you start a command tat is the first place to look.

 

LD

 

BTW - don't forget to accept as soultion if this helped you!

*Expert Elite*
LisaDrago
Posts: 1,380
Registered: ‎05-08-2009
Message 2 of 4 (1,191 Views)

Re: Duplicate Section Callout

02-14-2011 12:18 PM in reply to: BradleyOlsen4775

In the oiptions bar you should see reference other view - in the pull-down you should see the other views and you can select the one you want. The callout should be marked with a SIM when it is referencing another view.

LD


If this helped solve your issue - remember to 'accept as solution' to help other find answers!
You can't think AutoCAD and run Revit.
Email: LisaDragoEE@gmail.com
Contributor
BradleyOlsen4775
Posts: 20
Registered: ‎07-16-2009
Message 3 of 4 (1,188 Views)

Re: Duplicate Section Callout

02-14-2011 12:25 PM in reply to: BradleyOlsen4775

BLESS YOU!!  The options bar....so important, yet does not get all the looks.

Thanks!

*Expert Elite*
LisaDrago
Posts: 1,380
Registered: ‎05-08-2009
Message 4 of 4 (1,186 Views)

Re: Duplicate Section Callout

02-14-2011 12:27 PM in reply to: BradleyOlsen4775

You are welcome! Anytime i train anyone on Revit - I tell them as soon as you start a command tat is the first place to look.

 

LD

 

BTW - don't forget to accept as soultion if this helped you!


If this helped solve your issue - remember to 'accept as solution' to help other find answers!
You can't think AutoCAD and run Revit.
Email: LisaDragoEE@gmail.com
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.