Revit Architecture

Reply
Contributor
nikki
Posts: 15
Registered: ‎10-20-2004
Message 1 of 4 (94 Views)

double slope

94 Views, 3 Replies
11-08-2004 05:41 PM
Could someone help me? I'm trying to create an L shaped driveway that will slope in two directions, first across and the down. Could someone help me with this? Thanks!
*Aaron Rumple
Message 2 of 4 (94 Views)

Re: double slope

11-09-2004 06:04 AM in reply to: nikki
Apply a slope arrow.... "nikki" wrote in message news:10360575.1099964544599.JavaMail.jive@jiveforum2.autodesk.com... > Could someone help me? I'm trying to create an L shaped driveway that will slope in two directions, first across and the down. Could someone help me with this? Thanks!
Contributor
nikki
Posts: 15
Registered: ‎10-20-2004
Message 3 of 4 (94 Views)

Re: double slope

11-09-2004 12:12 PM in reply to: nikki
I applied a slop arrow, but I need to apply a double slope. Can this be achieved on the same slab? or do I need to create 2 different slabs with different slab arrows?
*Aaron Rumple
Message 4 of 4 (94 Views)

Re: double slope

11-09-2004 02:53 PM in reply to: nikki
Without seeing what you are doing, it sounds like you need two slabs. Or it could be modeled as an in-place family if it is too complex and needs warped surfaces. "nikki" wrote in message news:30894222.1100031174826.JavaMail.jive@jiveforum1.autodesk.com... > I applied a slop arrow, but I need to apply a double slope. Can this be achieved on the same slab? or do I need to create 2 different slabs with different slab arrows?
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.