Doors at a 45

[Anonymous]

Me again, How do i change the swing of a door to be 45instead of 90. I
wanna show exst. at 45 degrees.....

Thanks,
John Gray

[sbrown]

You need to create/download a door with a variable swing parameter there are many out there. Here is an example.

[Anonymous]

I posted this a while back, but here it is again.

[Anonymous]

I'm hoping in a future release, you will be able to peg the door swing to
the phase. So that existing doors and new doors can automatically be set to
45 or 90 degrees based on their phase. For now, you have to set the swing
by family type.

--
Bill McLees, AIA

McLees, Boggs & Selby, Architects
155 Franklin Street
P.O. Box 975
Macon, GA 31202

[Anonymous]

This swing door family is wonderful!

wrote in message news:5163055@discussion.autodesk.com...
You need to create/download a door with a variable swing parameter there are
many out there. Here is an example.

[JeffreyMcGrew]

We don't do it by Type. We make the swing an Instance Parameter so it's easy to set.

Then you just make a door Schedule that lists all the existing doors as a single line item so you can change them all in one go.