Revit Architecture

Revit Architecture

Reply
Valued Contributor
89 Posts
8 Kudos
Registered: ‎04-03-2012
Post 1 of 3
Accepted Solution

Door Swing Graphics at 'New Construction' Phase

982 Views, 2 Replies
11-22-2012 04:57 AM

Does anyone know a way to fix this?  Whenever I do a renovation project all the doors show in elevation with a heavy swing line when the view is set for 'Show New' or 'Show Complete'.  Normally, doors show the swing line as a thin dashed or hidden line.  For the life of me, I cannot adjust this graphic either through the graphics override or through the phase settings.

 

Anyone know how to do this?

 

Thanks in advance!

 

Dave

Got the answer -

 

I reset the Overrides in the Graphics Overrides for projection lines.  Almost too simple - but buried deep...

Valued Contributor
89 Posts
8 Kudos
Registered: ‎04-03-2012
Post 2 of 3

Re: Door Swing Graphics at 'New Construction' Phase

11-22-2012 05:45 AM in reply to: dtdesign

Also - I find that I cannot adjust components on a stair in the 'Show Complete' phase either - such as the risers of the plan showing as 'Overhead', etc.  I tried messing around with filters, but it isn't adjusting components, just the entire family in view...this is frustrating..

Valued Contributor
89 Posts
8 Kudos
Registered: ‎04-03-2012
Post 3 of 3

Re: Door Swing Graphics at 'New Construction' Phase

11-23-2012 03:11 AM in reply to: dtdesign

Got the answer -

 

I reset the Overrides in the Graphics Overrides for projection lines.  Almost too simple - but buried deep...

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post