Detail Numbers

[PhilvK]

I created a new sheet and dragged my plan and section onto it. The detail references on the plans and sections however do not update. What setting do I need to look at please?

[L.Maas]

The bubbles are by default filled with two values

1- The detail number it will get when that detail is placed on the sheet

2-The drawing number on which sheet it is placed

Underneath is basically more or less default behaviour with OOTB Revit.

Basically a sheet with one plan views and two section views placed.

 

[PhilvK]

I've already placed these sections on a sheet, but the detail numbers are not updating accordingly!

[L.Maas]

Strange. This is almost hardcoded in Revit.

Have you modified something to the Callout Head family you used?

Does it only happen in a single project or in all your (new) projects?

Can you upload your (stripped) project so that I can have a look.

(Make sure that after stripping the project the problem still exists)

[PhilvK]

Enllnt - Thank you for taking a look at this. My test project is attached.

Phil

[rmoore3]

You placed elevations, not sections on that sheet

[L.Maas · Accepted solution]

Rick is correct. You did not place a section on the sheet.

As soon as I place section 1 on the sheet the bubble will fill with the data.

[PhilvK]

How embarrassing! Thank you both!