Revit Architecture

Reply
Active Contributor
paul53_7
Posts: 48
Registered: ‎03-20-2012
Message 1 of 5 (655 Views)

Curved Roof/Wall

655 Views, 4 Replies
03-19-2013 12:16 PM

What would be the best way to draw this Roof.

 

(See picture + 2D drawing)

 

Thanks

*Expert Elite*
constantin.stroescu
Posts: 1,018
Registered: ‎10-29-2008
Message 2 of 5 (651 Views)

Re: Curved Roof/Wall

03-19-2013 12:21 PM in reply to: paul53_7

ROOF BY EXTRUSION

Constantin Stroescu
BIM Manager AGD
Active Contributor
paul53_7
Posts: 48
Registered: ‎03-20-2012
Message 3 of 5 (644 Views)

Re: Curved Roof/Wall

03-19-2013 12:26 PM in reply to: constantin.stroescu

How then to do the integral gutter?

 

Thanks

*Expert Elite*
constantin.stroescu
Posts: 1,018
Registered: ‎10-29-2008
Message 4 of 5 (628 Views)

Re: Curved Roof/Wall

03-19-2013 01:15 PM in reply to: paul53_7

for the integrated gutter:

  • after you made the Roof by Extrusion 
  • Build > Component > Model in Place >Family Category and Parameters > Roofs ...Name..you can baptise it : interior gutter 
  • choose Extrusion ...choose a profile view ( the elevation in wich you have drawn the roof profile) draw a rectangle (so to cut the roof profile ) and extrude it 
  • Now from Properties > Identity Data > Solid/Void > select Void....
  • in a 3d View (axonometric view) select the roof and the extruded void ( they must intersect each other) and from Geometry apply Cut.

 

Constantin Stroescu
BIM Manager AGD
Active Contributor
paul53_7
Posts: 48
Registered: ‎03-20-2012
Message 5 of 5 (616 Views)

Re: Curved Roof/Wall

03-19-2013 01:49 PM in reply to: constantin.stroescu

You make it look easy.

 

Thanks, have been away from Revit for a while so abit rusty.

 

Thank you.

 

 

Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.