Revit Architecture

Revit Architecture

Reply
New Member
2 Posts
0 Kudos
Registered: ‎01-11-2013
Post 1 of 4

curtain wall grid - referencing 2d geometry

333 Views, 3 Replies
01-17-2013 01:21 PM

I am wondering if it is possible to create the curtain wall grid divisions via a 'sketch mode' or by referencing 2d geometry. The reason I ask is because in order to get my spacing I had to draw it out in autocad anyways. It seems like instead of laying down each line, one at a time, there should be a way to just refer to this geometry or create it in a simple sketch mode.

Can anyone suggest how I might do this?
thanks

Product Support
638 Posts
30 Kudos
Registered: ‎09-08-2010
Post 2 of 4

Re: curtain wall grid - referencing 2d geometry

01-22-2013 05:24 AM in reply to: gfbsn

I don’t think it’s possible to create curtain grids via sketch mode or by referencing 2d geometry. I tested in 2013 by creating a section of Curtain Wall and exporting to DWG. I then bought it into a new Revit project but could find a way to using it, other than as an underlay. I’m not sure if a third party add-in exists, but I can see the benefits. 

 

Thanks for posting.



Alan Quinn
Support Specialist
Product Support
Autodesk, Inc.
New Member
2 Posts
0 Kudos
Registered: ‎01-11-2013
Post 3 of 4

Re: curtain wall grid - referencing 2d geometry

01-22-2013 06:29 AM in reply to: alan.quinn

Alan thanks for the response. Nice to know you someone's listening :smileyhappy:

 

i think this would be an invaluable tool and would make it far quicker & easier to generate curtainwall grids, particularly ones with alot of discontinuity. MIne is extremely tedious to implement whereas I was able to lay something out in autocad very quickly...

Product Support
638 Posts
30 Kudos
Registered: ‎09-08-2010
Post 4 of 4

Re: curtain wall grid - referencing 2d geometry

01-22-2013 02:05 PM in reply to: gfbsn

Hopefully functionality such as this will be available in a future release. Thanks again...



Alan Quinn
Support Specialist
Product Support
Autodesk, Inc.
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Are you interested in helping shape the future of the Autodesk Community? To participate in this brief usability study, please click here. Your time and input is greatly appreciated!