Revit Architecture

Revit Architecture

Reply
Valued Contributor
73 Posts
0 Kudos
Registered: ‎10-25-2013
Post 1 of 2
Accepted Solution

Creating two different types of ground floor slabs on the same level?

477 Views, 1 Replies
12-12-2013 01:46 AM

Hi,

I'm trying to separate my ground floor slab into two different slabs each with a different stratigraphy of layers.  How can I do this?  I've edited the footprint so that it looks like there are two distinct floor boundaries but when I go to select the floor in order to edit the type, the entire floor, or both "pieces" get selected and I can't seem to just edit one piece.... any suggestions?

You need to create two separate slabs. If the outline of your slab is intricate and you would prefer not to retrace one part, you should be able to edit the slab boundary and cut the boundary lines from the area for the "other" slab, then draw in the closing edge lines and accept the edits. Then start a new slab and paste the cut lines to start the boundary sketch of the "other" slab.
*Expert Elite*
2,773 Posts
299 Kudos
Registered: ‎12-09-2003
Post 2 of 2

Re: Creating two different types of ground floor slabs on the same level?

12-14-2013 07:54 PM in reply to: amontri
You need to create two separate slabs. If the outline of your slab is intricate and you would prefer not to retrace one part, you should be able to edit the slab boundary and cut the boundary lines from the area for the "other" slab, then draw in the closing edge lines and accept the edits. Then start a new slab and paste the cut lines to start the boundary sketch of the "other" slab.
David Koch
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Are you interested in helping shape the future of the Autodesk Community? To participate in this brief usability study, please click here. Your time and input is greatly appreciated!