Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Creating MARK parameter in Revit families

1 REPLY 1
Reply
Message 1 of 2
paulo
1573 Views, 1 Reply

Creating MARK parameter in Revit families

Greetings,


I need to create mark parameter in a family-based wall, whose value is not repeated in the project. To better understand, would be equal to the mark that exists in doors, which can not have duplicate values​​. It is also possible with the parameters of the family? Is there another solution for creating families? Shared Parameters could be the way?


thanks,

 

PAULO GALVÃO

1 REPLY 1
Message 2 of 2
Alfredo_Medina
in reply to: paulo

The question is not clear enough. Revit will provide a Mark parameter to that wall-based element, once it is loaded in a project; therefore, it is not clear why you would need to create that parameter again. In addition, the Mark parameter does not guarantee that the value of Mark cannot be duplicated, as you said. That is just warning, only, that can be ignored.


Alfredo Medina _________________________________________________________________ ______
Licensed Architect (Florida) | Freelance Instructor | Autodesk Expert Elite (on Revit) | Profile on Linkedin

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Rail Community


Autodesk Design & Make Report