Revit Architecture

Reply
Contributor
RoseKlem8300
Posts: 16
Registered: ‎01-29-2010
Message 1 of 5 (500 Views)
Accepted Solution

clipped corner garage doors

500 Views, 4 Replies
02-19-2014 05:35 AM

How can you make 45 degree corners for top of garage doors?

You can do it making a new Door Family :

  1. New Family > New Family- Select Template Family > Door >Open
  2. in Elevation View -Exterior > using TAB , select the Opening Cut > Edit Sketch > chamfer the corner as in Image 1 - you can make this parametric so to to can control the angle and length of chamfering ( I recomend this) - Now the opening is as you want
  3. Create a sweep for door frame and an extrusion for the door leaf..
  4. Load the door into project --Image 02 (a roughexample )

Image 01.png

 

 

Image 02.png

Contributor
nmysorewala
Posts: 22
Registered: ‎09-18-2007
Message 2 of 5 (493 Views)

Re: clipped corner garage doors

02-19-2014 06:07 AM in reply to: RoseKlem8300
can you post a graphic of what you are trying to achieve?

BIMologist
Contributor
RoseKlem8300
Posts: 16
Registered: ‎01-29-2010
Message 3 of 5 (489 Views)

Re: clipped corner garage doors

02-19-2014 06:15 AM in reply to: nmysorewala

These "clipped" corner garage doors openings are quite popular.  Has anyone ever modeled these in their projects?

*Expert Elite*
constantin.stroescu
Posts: 1,026
Registered: ‎10-29-2008
Message 4 of 5 (452 Views)

Re: clipped corner garage doors

02-19-2014 10:36 AM in reply to: nmysorewala

You can do it making a new Door Family :

  1. New Family > New Family- Select Template Family > Door >Open
  2. in Elevation View -Exterior > using TAB , select the Opening Cut > Edit Sketch > chamfer the corner as in Image 1 - you can make this parametric so to to can control the angle and length of chamfering ( I recomend this) - Now the opening is as you want
  3. Create a sweep for door frame and an extrusion for the door leaf..
  4. Load the door into project --Image 02 (a roughexample )

Image 01.png

 

 

Image 02.png

Constantin Stroescu
BIM Manager AGD
Contributor
RoseKlem8300
Posts: 16
Registered: ‎01-29-2010
Message 5 of 5 (438 Views)

Re: clipped corner garage doors

02-19-2014 11:44 AM in reply to: constantin.stroescu

Thanks - I will try that sometime.

For now I may stick with editing the wall profile :smileyhappy:

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.