Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
You should be able to select a single line of the ceiling grid (may have to "Tab" to get it) and then just move that grid line to where you need it. This is of course if the ceiling is drawn in your file.
On Sun, 25 Oct 2009 23:55:47 +0000, jacobkuntz <> wrote:
>Revit does a good job of centering the 2x4 grid in the rooms but you can't center a 2x4 light fixture in a small room. Any help?
If you want to center the light independently from the ceiling grid, create a
dimension string from the wall to the center of the fixture to the other wall,
and hit the "EQ" constraint. Do the same for the other direction.
