Revit Architecture

Revit Architecture

Reply
Mentor
David125
Posts: 189
Registered: ‎05-06-2008
Message 1 of 3 (276 Views)

Can't select lighting using crossing (left to right)

276 Views, 2 Replies
08-01-2012 05:00 PM

I have user that placed some lights on a model and now he can't select groups of lights using crossing.  He can select them indivigually.  We are using linked models arch, mech, elec ect.. The light he is placing was downloaded off a vendors site, when he placed a revit OTB family he can select it using crossing fine. We are using revit 2011. Any help would be appreciated.

*Expert Elite*
CADastrophe
Posts: 3,340
Registered: ‎08-28-2009
Message 2 of 3 (255 Views)

Re: Can't select lighting using crossing (left to right)

08-02-2012 06:22 AM in reply to: David125

Does setting the Visual Style to Wireframe allow the fixtures to be selected via selection window? Could you post the troublesome family file here for a quick investigation?

Corey D.                                                                                                                  ADSK_Logo_EE_2013.png    AutoCAD 2014 User  Revit 2014 User
──────────────────────────────────────────────────────────────────────
⁞|⁞ Please use Mark Solutions!.Accept as Solution and Give Kudos!Give Kudos as appropriate to further enhance these forums. Thank you!
Mentor
David125
Posts: 189
Registered: ‎05-06-2008
Message 3 of 3 (247 Views)

Re: Can't select lighting using crossing (left to right)

08-02-2012 08:48 AM in reply to: CADastrophe

I think we fixed it but I'm not sure why.  The light was originally placed on a ceiling that was 10'-101/2", on the ELEC model. It was placed on the ceiling view that already existed on that model. We view range was set to TOP:10'-0", CUT PLANE: 2'-0", BOTTOM: is greyed out at 2'-0" VIEW DEPTH: Unlimited. We changed the TOP: to 11'-0". now we can select the lights using crossing. Previously, my understanding was that you can select something as long as it is visible, guess I was wrong, again..

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.