Revit Architecture

Revit Architecture

Reply
Employee
slatch
Posts: 22
Registered: ‎11-22-2004
Message 1 of 24 (4,293 Views)

Autodesk Revit Architecture 2012 is now available

4293 Views, 23 Replies
04-11-2011 12:28 PM

All,

I am pleased to announce the release of Autodesk Revit Architecture 2012, which is available on the Subscription Center and will be available soon on Autodesk.com at http://www.autodesk.com/revitarchitecture-download.

At this time only the English version is available. The localized versions will be released over the next several months.

For a list of new features, please go here.

Regards,

Scott Latch
Revit Architecture Product Manager

Twitter.com/RevitArch
Active Member
ddunn1
Posts: 8
Registered: ‎06-22-2010
Message 2 of 24 (4,063 Views)

Re: Autodesk Revit Architecture 2012 is now available

04-15-2011 07:58 AM in reply to: slatch

I have tried the download 5 times, and it stops each time at the same spot. 2145 MB is the spot. Please fix this and report back here when it is ready to download again. Thanks

 

 

Active Member
ddunn1
Posts: 8
Registered: ‎06-22-2010
Message 3 of 24 (4,061 Views)

Re: Autodesk Revit Architecture 2012 is now available

04-15-2011 08:01 AM in reply to: ddunn1

I got it to restart now, but there is definitely a problem with it, it wants to hang up and stop at that point each time.

*Expert Elite*
DarrenP
Posts: 7,575
Registered: ‎09-13-2007
Message 4 of 24 (4,056 Views)

Re: Autodesk Revit Architecture 2012 is now available

04-15-2011 08:21 AM in reply to: ddunn1

might be a bandwidth issue

 

Active Member
ddunn1
Posts: 8
Registered: ‎06-22-2010
Message 5 of 24 (4,018 Views)

Re: Autodesk Revit Architecture 2012 is now available

04-15-2011 04:05 PM in reply to: DarrenP

bandwidth on Autodesk's part?  I have Roadrunner 1Mb/Sec service and have had no problems with other files, some of which are just as big. It stopped again at 82%, trying to get it to resume now....

Valued Contributor
cjgielens
Posts: 92
Registered: ‎06-29-2004
Message 6 of 24 (3,690 Views)

Re: Autodesk Revit Architecture 2012 is now available

04-28-2011 07:28 AM in reply to: ddunn1

i hope there is a update soon, coz the families are a bit screwed up.... :-(

Valued Contributor
pedroaroso
Posts: 55
Registered: ‎08-05-2009
Message 7 of 24 (3,021 Views)

Re: Autodesk Revit Architecture 2012 is now available

07-15-2011 07:22 AM in reply to: cjgielens

I've installed the 2012 trial but can't find and load the families. Where are they?

Member
acardoso
Posts: 5
Registered: ‎03-06-2008
Message 8 of 24 (2,999 Views)

Re: Autodesk Revit Architecture 2012 is now available

07-15-2011 04:17 PM in reply to: pedroaroso

Pedro, you should try to repair the installation (go to Control Panel --> Programs and Features). To configure instalation, click on the tiny arrow under 'Revit Architecture 2012' and select your prefered content. This should be enough.

Abraço.

Valued Contributor
pedroaroso
Posts: 51
Registered: ‎08-22-2005
Message 9 of 24 (2,978 Views)

Re: Autodesk Revit Architecture 2012 is now available

07-16-2011 11:53 AM in reply to: acardoso

Thank you Andre.

As you know, I've have never been a Revit fan, but this version is driving me crazy.

  In my opinion, it seems even less intuitive than previous versions. I just don't understand why Autodesk is always changing the interface, instead of adding new features.

Obrigado e um abraço.

Ay2
New Member
Ay2
Posts: 1
Registered: ‎08-01-2011
Message 10 of 24 (2,832 Views)

Re: Autodesk Revit Architecture 2012 is now available

08-01-2011 09:33 AM in reply to: slatch

Kindly assist me with downloading the Trial version of Autodesk Revit Architecture as the Akamai Netsession download manager is not able to assist as recommended on you website.

 

Thanks in advance.

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Are You Going To Be @ AU 2014? Feel free to drop by our AU topic post and share your plans, plug a class that you're teaching, or simply check out who else from the community might be in attendance. Ohh and don't forgot to stop by the Autodesk Help | Learn | Collaborate booths in the Exhibit Hall and meet our community team if you get a chance!