Revit Architecture

Valued Mentor
Posts: 336
Registered: ‎08-05-2012
Message 1 of 3 (151 Views)

Attached Wall

151 Views, 2 Replies
09-14-2013 10:08 AM



I wish On Wall Attached Longitudinal Or Trim The  italic Existed.


I mean, this is ,If I have a wall And a Refrenc Plane In italic, If the Trim tool It I modified End Wall With Angle Refrenc


Plane Be adjusted Not perpendicular.


Like the image below





Not perpendicular wall.jpg



*Expert Elite*
Posts: 1,007
Registered: ‎10-29-2008
Message 2 of 3 (133 Views)

Re: Attached Wall

09-14-2013 11:17 AM in reply to: gh_ar


In order to Cut the wall after an angle I usualy use one of the two methods described in the following:

  1. Draw a second wall at the desired  angle and then override with Hide Elements -image 1
  2. Make a Component >Model in Place >Wall >Extruded Void and Cut the wall with it. If you attach the edge (as seen in the second image) to the reference plane -then moving the reference plane - moves the cut...image 2 and 3

The first method is a quick one , but it has to be repeated in every View because is an override by View....

Image 208.png


Image 207.png


Image 206.png

Constantin Stroescu
BIM Manager AGD
Valued Mentor
Posts: 336
Registered: ‎08-05-2012
Message 3 of 3 (127 Views)

Re: Attached Wall

09-14-2013 11:47 AM in reply to: gh_ar



Thanks for your answer.

Yes - I am using the wall of the Void

Not perpendicular wall-2.jpg



But In my opinion This is a problem Because for such a small task Should Enter space Families will The own Time is wasted.


And about Hiding:

I think the projects The the output is It is important This method is not correctly.
For many reasons:

-In each View Should chosen to hide.

-Cost estimates will not .


-Potential problems Dealing with other elements There is.

And ....

Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.