Revit Architecture

Revit Architecture

Reply
*Expert Elite*
doni49
Posts: 2,019
Registered: ‎12-22-2012
Message 1 of 5 (818 Views)

Asphalt Shingles Require "Realistic", B&B Wall Pattern requires "Shaded"

818 Views, 4 Replies
06-07-2013 11:33 AM

I created a Board and Batten material using a pattern I downloaded from this forum (http://forums.autodesk.com/t5/Autodesk-Revit-Architecture/Board-Batten-Exterior-Finish/m-p/2514833#M...).

 

The wall looks great when viewed in "Shaded".  But when viewed in "Realistic", the B&B pattern disappears and is replaced by solid color.

 

I used the OOTB Asphal Shingles on my roof.  If my view is set to "Shaded", they do not show -- all I get is solid gray.  If I change the view to realistic, I get the roof shingles.

 

I'm currently at a loss here.  Any ideas?

 

I'm attaching a screen shot of what the two look like.

 

Thanks!

 

Don Ireland



If a reply solves your issue, please remember to click on "Accept as Solution". This will help other users looking to solve a similar issue. Thank you.






Forum links:
AutoCAD 2013/2014/2015
AutoCAD 2010/2011/2012

AutoLISP, VB and other AutoCAD customization


Civil 3D General
Civil 3d Customization


Other Helpful links:
My File is too large to post or I can't post it due to privacy issues!
Active Contributor
mpwuzhere
Posts: 36
Registered: ‎12-28-2006
Message 2 of 5 (808 Views)

Re: Asphalt Shingles Require "Realistic", B&B Wall Pattern require

06-07-2013 11:55 AM in reply to: doni49

Realistic utilizes an actual image map of what the material looks like....so if you don't have an image assigned it shows as a solid color.  Be aware that any 3D Fill Patterns assigned to a material will not show up in Realistic either.

*Expert Elite*
doni49
Posts: 2,019
Registered: ‎12-22-2012
Message 3 of 5 (806 Views)

Re: Asphalt Shingles Require "Realistic", B&B Wall Pattern require

06-07-2013 11:58 AM in reply to: mpwuzhere

Thinking that it might be something along those lines, I downloaded an asphalt shingle pattern file (http://www.revitcity.com/downloads.php?action=view&object_id=3012) and assigned it to the roof as well.  I thought maybe the pattern would show up when in shaded.  But it didn't appear.

Don Ireland



If a reply solves your issue, please remember to click on "Accept as Solution". This will help other users looking to solve a similar issue. Thank you.






Forum links:
AutoCAD 2013/2014/2015
AutoCAD 2010/2011/2012

AutoLISP, VB and other AutoCAD customization


Civil 3D General
Civil 3d Customization


Other Helpful links:
My File is too large to post or I can't post it due to privacy issues!
Active Contributor
mpwuzhere
Posts: 36
Registered: ‎12-28-2006
Message 4 of 5 (798 Views)

Re: Asphalt Shingles Require "Realistic", B&B Wall Pattern require

06-07-2013 12:26 PM in reply to: doni49

Was it Model or Drafting Pattern?  Drafting Patterns only show in 2D....Model in both 2D and 3D....

*Expert Elite*
doni49
Posts: 2,019
Registered: ‎12-22-2012
Message 5 of 5 (795 Views)

Re: Asphalt Shingles Require "Realistic", B&B Wall Pattern require

06-07-2013 12:36 PM in reply to: doni49

Model

 

shingle.png

Don Ireland



If a reply solves your issue, please remember to click on "Accept as Solution". This will help other users looking to solve a similar issue. Thank you.






Forum links:
AutoCAD 2013/2014/2015
AutoCAD 2010/2011/2012

AutoLISP, VB and other AutoCAD customization


Civil 3D General
Civil 3d Customization


Other Helpful links:
My File is too large to post or I can't post it due to privacy issues!
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.