Revit Architecture

Revit Architecture

Reply
New Member
daxelsen
Posts: 1
Registered: ‎08-21-2012
Message 1 of 2 (246 Views)

Adding and removing wall thickness in Existing and new construction

246 Views, 1 Replies
08-21-2012 07:12 AM

Hi 

 

I have drawn an existing building thats needs a renovation. In the project i need to add 100mm insulation to the external side of the outer walls. Are there any way that i can add theese 100mm to my existing walls but only show the new 100mm  in new construction ? 

 

 

Regards Daniel

 

 

Distinguished Contributor
cvandevere
Posts: 119
Registered: ‎09-02-2006
Message 2 of 2 (234 Views)

Re: Adding and removing wall thickness in Existing and new construction

08-21-2012 09:19 AM in reply to: daxelsen

You need to create the 100mm wall type and then locate adjacent to the existing wall type. you may have to join the two walls with the join command so that the existing openings, if any,  cut through the new wall. 

CDV
Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.