Additonally, if you need to share these with others, that's easy too. Just
start a new project, and draw a railing. Load and apply your railing
components then save the file. Send the RVT file to your clients. They
open the RVT, cut-n-paste the railing into their project, and then they can
apply that same railing style to any railing in their project.
"sdbrown" wrote in message
news:21105645.1093009469701.JavaMail.jive@jiveforum1.autodesk.com...
> Yes you can make those no problem. You make the peices just as you have
done in acad as panels, the assemble the diff pieces with in the revit
project. If you have revit there are tutorials on this in the help pull
down, just search for railings, here is an example of 3 on a project I'm
currently working on.