Revit Architecture

Revit Architecture

Reply
Active Contributor
Milos_Vajdic
Posts: 26
Registered: ‎12-15-2011
Message 1 of 5 (3,216 Views)
Accepted Solution

(2013) Stair Tread/Riser Number annotation problems

3216 Views, 4 Replies
05-03-2012 09:54 PM

HI guys,

First of all I love this new annotation but Tag Type parameter seems to be broken.

It always shows number of risers not treads (changing Tag Type does nothing)

Landing is never counted.

 

And there is no way of changing default values for text size which shows up as 1.1906mm.

 

Any help is greatly appreciated.

 

Thanks,

Milos

I didn't think it was a problem. In any case I figured our my problem.

What was happening is that in instance options "end with riser" was unchecked therefore creating an extra tread, which leveled with the floor.

 

Since this is an instance setting now (changing riser or tread finish)

During creating stairs stage select "runs" subcategory and select proper settings. That will ensure that this specific stair types will follow modified settings.

 

settings.jpg

*Expert Elite*
Alfredo_Medina
Posts: 2,821
Registered: ‎06-11-2009
Message 2 of 5 (3,199 Views)

Re: (2013) Stair Tread/Riser Number annotation problems

05-04-2012 07:52 AM in reply to: Milos_Vajdic

Seems to be working as expected.

 

stair_numbers.jpg

-----------------------------------------------------------------------------------------------------------------
Planta1 Revit Online Consulting | info@planta1.com | my Twitter | The Planta1 Blog
Active Contributor
Milos_Vajdic
Posts: 26
Registered: ‎12-15-2011
Message 3 of 5 (3,172 Views)

Re: (2013) Stair Tread/Riser Number annotation problems

05-06-2012 06:36 PM in reply to: Alfredo_Medina
Hmmm... That is interesting. This is what I get (see attached) when I use office template stairs. If I use stairs from 2013 template all is well. hmmm... must be something wrong with my stairs or with stairs being upgraded from 2012?
Mentor
parveen.revit
Posts: 232
Registered: ‎09-29-2010
Message 4 of 5 (3,160 Views)

Re: (2013) Stair Tread/Riser Number annotation problems

05-06-2012 10:00 PM in reply to: Milos_Vajdic

you didn't mentioned that you have upgraded the stairs from 2012 to 2013.

 

Parveen_Intec_Infocom (BIM, CAD, GIS, QS Services' Provider)
Active Contributor
Milos_Vajdic
Posts: 26
Registered: ‎12-15-2011
Message 5 of 5 (3,157 Views)

Re: (2013) Stair Tread/Riser Number annotation problems

05-06-2012 10:12 PM in reply to: parveen.revit

I didn't think it was a problem. In any case I figured our my problem.

What was happening is that in instance options "end with riser" was unchecked therefore creating an extra tread, which leveled with the floor.

 

Since this is an instance setting now (changing riser or tread finish)

During creating stairs stage select "runs" subcategory and select proper settings. That will ensure that this specific stair types will follow modified settings.

 

settings.jpg

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.