Revit API

New Member
Posts: 2
Registered: ‎09-27-2012
Message 1 of 3 (204 Views)


204 Views, 2 Replies
09-27-2012 11:22 AM



I've been asked by a customer to develop a solution capable of extracting information from Revit tubing design. The solutions would consist of taking a non-standard tubing model an extract the data  such as lenght, bending angles, bending location, size of tubing, etc.


Since Revit is more a software for construction design rather than manufacturing, is theres functions in the Revit API capable to extract this type of information ? Would I need to convert the data in another format (ie: .dwg )to be capable to extract such information ?


Any help or recomendation would be appreciated.


Best regards,

Posts: 19
Registered: ‎07-05-2009
Message 2 of 3 (200 Views)

Re: Revit API MEP

09-27-2012 04:53 PM in reply to: promarc

I m not an MEP expert, but if these information are available in Revit MEP (I assume they do, since this is what your customer has asked), chances are that you can get it through API without using dwg. 

Or, if they are not directly available, you can deduce them by doing some calculation (e.g. you can get the coordinates of two points through API and then calculate the length in your own code). 

New Member
Posts: 2
Registered: ‎09-27-2012
Message 3 of 3 (189 Views)

Re: Revit API MEP

09-28-2012 06:04 AM in reply to: zhangle

Thanks for your reply,


Our customer is not a specialist in Revit  MEP, they wan to automate a process which is done manually today. We worked with other mechanical CAD software, and we know we can do it. Revit MEP seems to have very little meta information in the geometry itself, but your right we could extract the information and manipulate it, but it would make the algorithm a little bit more tricky then just extracting the information if available.


Have a good day

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.