QuickCAD

QuickCAD

Reply
*Budd, Tom
Message 1 of 2 (359 Views)

PLOTTER DRIVERS-Summagraphics or Houston Instruments drivers for V6?

359 Views, 1 Replies
02-15-2000 01:29 PM
Does anyone know if there are plotter drivers available for Older Houston
Instruments or Summagraphic plotters for use with Quickcad V6? I have been
using Quickcad v 3.02 with an older Houston Instruments Pen Plotter (DMP-60)
with a driver (I believe from Summagraphics) ver. 2.40 without a problem.

I installed v6 but the plotter driver does not seem to work properly with
the new version of Quickcad. TMS Plotter Specialists lists a driver for
Windows 95/98 which they say is not compitable with AutoCAD 2000. Are
quickcad v6 and Autocad 2000 similiar enough where the driver would not be
considered compatible? Or could I use another driver that may be compatable
with Autocad 2000? Does anyone know where I can find drivers?

Any help, comments, suggestions would be appreciated.

Tom Budd
tbudd@sight-pipe.com
*Support], Keith Sibbert [Autodesk
Message 2 of 2 (359 Views)

Re: PLOTTER DRIVERS-Summagraphics or Houston Instruments drivers for V6?

02-15-2000 10:22 PM in reply to: *Budd, Tom
Tom,

You might check at http://www.cadalog.com/ or at http://www.winline.com/ and see
if they have a Windows system driver that will work for your plotter.

--
Keith Sibbert
PSG Product Support, Americas
WW Support & Services, Autodesk
Discussion Q&A: http://www.autodesk.com/discussion

Tom Budd wrote:

> Does anyone know if there are plotter drivers available for Older Houston
> Instruments or Summagraphic plotters for use with Quickcad V6? I have been
> using Quickcad v 3.02 with an older Houston Instruments Pen Plotter (DMP-60)
> with a driver (I believe from Summagraphics) ver. 2.40 without a problem.
>
> I installed v6 but the plotter driver does not seem to work properly with
> the new version of Quickcad. TMS Plotter Specialists lists a driver for
> Windows 95/98 which they say is not compitable with AutoCAD 2000. Are
> quickcad v6 and Autocad 2000 similiar enough where the driver would not be
> considered compatible? Or could I use another driver that may be compatable
> with Autocad 2000? Does anyone know where I can find drivers?
>
> Any help, comments, suggestions would be appreciated.
>
> Tom Budd
> tbudd@sight-pipe.com
Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.