*Clark, Christopher
Message 1 of 5 (1,611 Views)

Drafix cad Ultra

1611 Views, 4 Replies
03-17-2000 06:05 AM
Can Quickcad load Drafix Ultra files? I have older
drawings that

I would like to convert to DXF. Ultra will not run
on my newer PC.

Is there a program for DWG->DXF somewhere on the


Thanks in advance.
*Maugeri, Ralph
Message 2 of 5 (1,611 Views)

Re: Drafix cad Ultra

03-20-2000 06:59 AM in reply to: *Clark, Christopher
I'm new here, but your question remains unanswered, sooo....
I haven't tried to bring ultra drawing to Qcad. But you may have to
bring them into drafix cad and then into Q-cad.
Bringing them into D-cad was messy. Have you tried going to dos and
running ultra, or are you running 2000?
Have fun.
Ralph Maugeri
Creative Arch. Designs.
*Clark, Christopher
Message 3 of 5 (1,611 Views)


03-30-2000 10:45 AM in reply to: *Clark, Christopher
Thanks for the Help. I managed to run ultra in a DOS window (W98) by
a video driver. ( old ones were HALO drivers). Anyways, I could see only 1/4
of the screen
and ran my commands via the keyboard.

From AutoCAD LT98. Do a file recover, type *.DXF.

This worked well and preserved all the SYMBOLS/BLOCKS.
After, Just do a save as...
New Member
Posts: 2
Registered: ‎05-08-2012
Message 4 of 5 (1,562 Views)

Re: Drafix cad conversion

05-08-2012 05:44 PM in reply to: *Clark, Christopher



I have hundreds of drawings on old Drafix from the 80s.  

It is based on Halo and runs only on DOS.  

I can run it in the DOS shell of Windows XP, but it expects to output to LPT1 or a Com port.  

And it has a limited list of printers it can drive including HP Inkjet and "Inkjet+ /2"  

The HP672C I relied on is now a coffee grinder that I probably can't get repaired or replaced.  

Only their lasers have parallel ports.


Any ideas?  

Centronics to USB conversion to recent HP Inkjet?

Method transferring/converting .dfx files to another format?





New Member
Posts: 2
Registered: ‎05-08-2012
Message 5 of 5 (1,561 Views)

Getting old Drafix files

05-08-2012 05:47 PM in reply to: *Clark, Christopher

Saw your post.

Have classic Drafix from the 80s and hundreds of files for it and the HP672C on which I relied is grinding coffee.

Drafix wants to use LPT1 or a COM port and drive an HP Inkjet or similar old device

Can I take .dfx files and convert them to/in a program I have more printing options on?



Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.