Quantity Takeoff (Read Only)
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

QTO 2013 - Average Length Calculation

1 REPLY 1
Reply
Message 1 of 2
kgiddens112
1136 Views, 1 Reply

QTO 2013 - Average Length Calculation

I'm trying to get the average length of a wall condition.  The formula would be Length/Count.  For some reason QTO does not calculate and displays only the length of the wall.  Has anyone had any experience with this?

Thanks for any help!

Tags (2)
1 REPLY 1
Message 2 of 2
john.lipp
in reply to: kgiddens112

Hi kgiddens112


I’ve reproduced the issue.  There appears to be an issue with the Count quantity value in formula calculations.  I also found that if you use a numeric value in the place of Length and divide it by Count, the resulting calculation is multiplied rather than divided.

To workaround the issue, please use the actual numeric value of the Count in the formula such as Length/12.

This issue has been logged with our development team.


Best regards,



John Lipp
Support Specialist
Product Support
Autodesk, Inc.

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report