Printing and Plotting

Printing and Plotting

Reply
New Member
lexi.kellysmith
Posts: 1
Registered: ‎10-02-2012
Message 1 of 2 (178 Views)

setting up printer format! PLEASE HELP!

178 Views, 1 Replies
10-02-2012 08:16 PM

I have to set up my drawing on the model page so that I can save it as a PDF and then transfer it into adobe illustrator. My scale is 1:1, and when I put it on the model page I'm doing a 1/8" : 1' scale. It should fit on the page no problem, its only a 9" model plan on 1/4 scale, so it should be 4.5" on the page. However, it's too big for the page. Can someone please help me solve this issue? I need an answer pronto!

*Expert Elite*
pendean
Posts: 22,634
Registered: ‎11-06-2003
Message 2 of 2 (138 Views)

Re: setting up printer format! PLEASE HELP!

10-04-2012 05:40 AM in reply to: lexi.kellysmith

9" at a 1/4" scale is 2.25", not 4.5".

So at 1/8" it's 1.125".

 

This is where actually using a layout and a viewport comes in handy to double-check yourself before plotting: try it. If you don't know how, post your DWG with the object here for someone to help you out.

Dean Saadallah Blog | Facebook | Google+ | Twitter | PINS
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.