Printing and Plotting

Printing and Plotting

Active Contributor
Posts: 27
Registered: ‎11-21-2003
Message 1 of 2 (64 Views)

Plotting Textmasks on HP DesignJet

64 Views, 1 Replies
11-20-2003 07:21 AM
I am having problems with the textmask plotting on the HP DesignJet 750C+ plotter. The mask frame (a wipeout) is plotting (with frames OFF) and shows all objects inside that should be masked. I updated the HP drivers to V4.63 from, but no difference. When I plot to our Xerox, the masking works great! I read that .hdi drives (like the HP) have problems with masks/wipeouts. Any help would be appreciated.
Aloha, Mike
*Wojtynek, Steve
Message 2 of 2 (64 Views)

Re: Plotting Textmasks on HP DesignJet

11-20-2003 07:46 AM in reply to: RHA_Mike
We don't have that plotter, but in general,
I have better luck creating PC3's to Windows
System Printers and plotting to those.  I also set up a Plot pulldown menu
to grab frequently used Plot Styles stored in DWT files.  Those Plot
Styles always point to PC3's that use PCL5e versions of Windows
There's also a lisp routine out there
called PAGEOUT that will write a script that fills in the Plot Dialog Box for
you every time.  Fill it in right.  Save it to a
script.  Launch the script from a command line in a Pulldown
Menu.  It's a real time saver compared to filling in all those
little windows every time. 
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.