Community
Fusion Design, Validate & Document
Stuck on a workflow? Have a tricky question about a Fusion (formerly Fusion 360) feature? Share your project, tips and tricks, ask questions, and get advice from the community.
cancel
Showing results forĀ 
ShowĀ Ā onlyĀ  | Search instead forĀ 
Did you mean:Ā 

Design your own Halloween pumpkin in Fusion 360!

12 REPLIES 12
Reply
Message 1 of 13
sachlene.singh
3977 Views, 12 Replies

Design your own Halloween pumpkin in Fusion 360!

Ok, we're definitely taking it too far with this open challenge, but hey, its just that kind of holiday! šŸ™‚

 

Its the Design your own Halloween Pumpkin Challenge! 

 

Let Fusion 360 help you take your pumpkin carving to a whole new level. Whether you are just starting out wih Fusion or are the expert extraordinaire, this challenge is for you and its time to get creative!

 

We've made it quite easy. You don't have to start from scratch. I've attached a model of a pumpkin that you can use to get started. Just edit Sketch 3 in the Browser and create your own carving on the pumpkin. 

 

If you are feeling a bit more creative, here are two videos that show you how to create a pumpkin in Fusion. 

Happy Halloween! Carve a pumpkin in Fusion 360

Fusion 360: How-to design a pumpkin from scratch

 

Upload your designs here and lets see what you've got!

 

-Sachlene
12 REPLIES 12
Message 2 of 13

Oh, and here's my design...

(Lets just call this Take 1) šŸ˜„

 

Tip: Render the final design to see the glow from the candle.

 

Pumpkin rendering.png

 

 

-Sachlene
Message 3 of 13

Boo!

 

JackyO2.png

 

Colin Smith
Sr. Product Manager
SketchBook
Alias Create VR (aka Project Sugarhill)
Automotive & Conceptual Design Group
Message 4 of 13

In oder to have your pumpkin glow you will need to apply a light emitting material from the Legacy material library.

Here are the settings I used for my pumpkin.  BTW, a light emitting material is comming soon to the Fusion 360 Appearance Materials Robot tongue

Also make sure that you are rendering on Advanced quality to get the correct effect.

 

Screen Shot 2014-10-09 at 1.55.44 PM.png

Colin Smith
Sr. Product Manager
SketchBook
Alias Create VR (aka Project Sugarhill)
Automotive & Conceptual Design Group
Message 5 of 13
Mike.Zhang
in reply to: colin.smith

LED_Material.png

Regards,



Mike.Zhang
SQA Engineer
Fusion 360 Quality Assurance Team
Autodesk, Inc.

Message 6 of 13
Mike.Zhang
in reply to: Mike.Zhang

You_can_find_the_LED_material_here!.png

Regards,



Mike.Zhang
SQA Engineer
Fusion 360 Quality Assurance Team
Autodesk, Inc.

Message 7 of 13
secorw
in reply to: sachlene.singh

Will_Secor_pumpkin.png

Message 8 of 13
00Hector
in reply to: sachlene.singh

Hola buenos dias aqui pongo mi aportacion a el diseƱo de la calabaza espero que sea de su agrado y espero su opnion saludos desde monterrey nuevo leon mexico.calalvaza_fusion_3_recover.dwg_2014-oct-27_11-35-33-000_Active.jpgcalalvaza_fusion_3_recover.dwg_2014-oct-27_11-39-17-000_Camera2.jpgcalalvaza_fusion_3_recover.dwg_2014-oct-27_11-39-52-000_Camera3.jpgcalalvaza_fusion_3_recover.dwg_2014-oct-27_11-40-25-000_Camera4.jpgcalalvaza_fusion_3_recover.dwg_2014-oct-27_11-41-23-000_Camera1.jpg



 

 

Autodesk es la vida de las ideas y la alma de los inventores
Message 9 of 13
sachlene.singh
in reply to: 00Hector

Those designs look fabulous 00Hector!

Thank you for the kind words.

-Sachlene
Message 10 of 13

Happy Halloween!

 

AubryPumpkinEntry.png

Michael Aubry
Autodesk Fusion 360 Evangelist
Message 11 of 13

 

Machining Pumkin Head

Jamie_Gilchrist_contest_entry.png

hope this helps,


Jamie Gilchrist
Principal Experience Designer
Message 12 of 13
TannerReid
in reply to: sachlene.singh

j_scared.png


Tanner Reid

Product Design Engineer

Message 13 of 13
TannerReid
in reply to: sachlene.singh

J_sun.png


Tanner Reid

Product Design Engineer

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report