Community
Fusion Design, Validate & Document
Stuck on a workflow? Have a tricky question about a Fusion (formerly Fusion 360) feature? Share your project, tips and tricks, ask questions, and get advice from the community.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Basic Tips and Tricks

1 REPLY 1
Reply
Message 1 of 2
herzinj
389 Views, 1 Reply

Basic Tips and Tricks

From time to time I stumble on a simple tip that would be helpful for Fusion 360 users to know, especially for those that are just gettinig started with the software.  I thought this would be a nice place to host those tips.  If you have any that you would like to add, please feel free to join in!

https://damassets.autodesk.net/content/dam/autodesk/logos/autodesk-logo-primary-rgb-black-small_forum.png
1 REPLY 1
Message 2 of 2
herzinj
in reply to: herzinj

Here's a great little tip from @Will_Secor that quickly shows how you can easily select between faces, verticies, edges and others with a simple click and hold.

 

 

James

https://damassets.autodesk.net/content/dam/autodesk/logos/autodesk-logo-primary-rgb-black-small_forum.png

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report