.NET

Reply
Active Contributor
tangferry
Posts: 43
Registered: ‎04-21-2005
Message 1 of 11 (120 Views)

The biggest problems in the managed ObjectARX

120 Views, 10 Replies
05-19-2005 06:07 AM
1.Menu
2.Toolbar
3.Selectionset(multiple select)
*Mike Tuersley
Message 2 of 11 (120 Views)

Re: The biggest problems in the managed ObjectARX

05-19-2005 07:16 AM in reply to: tangferry
My biggest....people refereing to managed ObjectARX!!! Drop the ObjectARX
as .NET and it are two different beasts.

-- Mike
___________________________
Mike Tuersley
___________________________
the trick is to realize that there is no spoon...
*Tony Tanzillo
Message 3 of 11 (120 Views)

Re: The biggest problems in the managed ObjectARX

05-19-2005 02:44 PM in reply to: tangferry
"Mike Tuersley" wrote

>> My biggest....people refereing to managed ObjectARX!!!
>> Drop the ObjectARX as .NET and it are two different beasts.

No, they're not two different beasts. There are some
differences, but they are more alike than they are
different. The fact of the matter is that the managed
wrappers for ObjectARX require some understanding of
ObjectARX.

The only problem here is that the hill may be a bit too
steep for some of you VB 'programmers', but spinning
that as something other than what it is, isn't going to
get you much sympathy from most ObjectARX types.

--
http://www.caddzone.com

AcadXTabs: MDI Document Tabs for AutoCAD 2004/2005/2006
http://www.acadxtabs.com
*Paul Richardson
Message 4 of 11 (120 Views)

Re: The biggest problems in the managed ObjectARX

05-19-2005 04:10 PM in reply to: tangferry
>The only problem here is that the hill may be a bit too
>steep for some of you VB 'programmers'

If this is all the logic we need for ARX than I'm
all set....:smileywink:


"Tony Tanzillo" wrote in message
news:4851193@discussion.autodesk.com...
"Mike Tuersley" wrote

>> My biggest....people refereing to managed ObjectARX!!!
>> Drop the ObjectARX as .NET and it are two different beasts.

No, they're not two different beasts. There are some
differences, but they are more alike than they are
different. The fact of the matter is that the managed
wrappers for ObjectARX require some understanding of
ObjectARX.

The only problem here is that the hill may be a bit too
steep for some of you VB 'programmers', but spinning
that as something other than what it is, isn't going to
get you much sympathy from most ObjectARX types.

--
http://www.caddzone.com

AcadXTabs: MDI Document Tabs for AutoCAD 2004/2005/2006
http://www.acadxtabs.com
*Frank Oquendo
Message 5 of 11 (120 Views)

Re: The biggest problems in the managed ObjectARX

05-19-2005 04:38 PM in reply to: tangferry
Tony Tanzillo wrote:
> The fact of the matter is that the managed
> wrappers for ObjectARX require some understanding of
> ObjectARX.

So managed ObjectARX question would be best served by the ObjectARX group? I
think that's what Mike was driving at.
*Albert Szilvasy
Message 6 of 11 (120 Views)

Re: The biggest problems in the managed ObjectARX

05-19-2005 05:32 PM in reply to: tangferry
Hi there,

This is a bit terse. Can you elaborate? What do you perceive as a problem
here?

Albert
wrote in message news:4850204@discussion.autodesk.com...
1.Menu
2.Toolbar
3.Selectionset(multiple select)
*Tony Tanzillo
Message 7 of 11 (120 Views)

Re: The biggest problems in the managed ObjectARX

05-19-2005 08:11 PM in reply to: tangferry
ObjectARX programmers also must use the COM
API for accessing toolbars and menus. Not sure
what you mean by third item. What have you found
lacking?

--
http://www.caddzone.com

AcadXTabs: MDI Document Tabs for AutoCAD 2004/2005/2006
http://www.acadxtabs.com

wrote in message news:4850204@discussion.autodesk.com...
1.Menu
2.Toolbar
3.Selectionset(multiple select)
*Mike Tuersley
Message 8 of 11 (120 Views)

Re: The biggest problems in the managed ObjectARX

05-20-2005 06:04 AM in reply to: tangferry
Thanks, yes, that's my point. Poor choice of wording on my part.

-- Mike
___________________________
Mike Tuersley
___________________________
the trick is to realize that there is no spoon...
*Mike Tuersley
Message 9 of 11 (120 Views)

Re: The biggest problems in the managed ObjectARX

05-20-2005 06:08 AM in reply to: tangferry
Correct me if I am wrong, but there is no ObjectARX.NET There is ObjectARX
and there is the managed .NET libraries. You can do ObjectARX dev or
C++.NET/VB.NET/C#.NET dev

-- Mike
___________________________
Mike Tuersley
___________________________
the trick is to realize that there is no spoon...
*Mike Tuersley
Message 10 of 11 (120 Views)

Re: The biggest problems in the managed ObjectARX

05-20-2005 06:14 AM in reply to: tangferry
Oh, and my choice of wording about being "different beasts" was poorly
conceived.My point is we have OUR group now and there remains the ObjectARX
group =)

-- Mike
___________________________
Mike Tuersley
___________________________
the trick is to realize that there is no spoon...
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.