.NET

.NET

Reply
Distinguished Contributor
116 Posts
1 Kudo
Registered: ‎02-26-2009
Post 1 of 5
Accepted Solution

Polyline direction (clockwise or counterclockwise)

1865 Views, 4 Replies
09-07-2013 11:52 PM

I am trying to set up the bulge for  a polyline, in order to set up the bulge currecty I need to know if the polyline was created clockwise or counterclockwise.

 

Any advice would be appreciated.

 

-J

Hi,

 

I just did a search for "clockwise" in this forum here ... and the second item (in the current search result) answers your question (>>>click<<<).


- alfred -

*Expert Elite*
9,793 Posts
1,210 Kudos
Registered: ‎06-29-2007
Post 2 of 5

Re: Polyline direction (clockwise or counterclockwise)

09-08-2013 12:03 AM in reply to: junoj

Hi,

 

I just did a search for "clockwise" in this forum here ... and the second item (in the current search result) answers your question (>>>click<<<).


- alfred -

-------------------------------------------------------------------------
Alfred NESWADBA
Ingenieur Studio HOLLAUS ... www.hollaus.at
-------------------------------------------------------------------------
Distinguished Contributor
116 Posts
1 Kudo
Registered: ‎02-26-2009
Post 3 of 5

Re: Polyline direction (clockwise or counterclockwise)

09-10-2013 10:09 PM in reply to: Alfred.NESWADBA

Alfred, thank you for the link.

 

I don’t think they ever solved the problem in the link, but it have a good idea. I end up using my own algorithm at the end of the day

*Expert Elite*
2,140 Posts
253 Kudos
Registered: ‎04-29-2006
Post 4 of 5

Re: Polyline direction (clockwise or counterclockwise)

09-10-2013 11:25 PM in reply to: junoj

By my side, I think the algebraic area (signed area) DOES solve the problem.

Did you try the code I posted in the last repy of this thread?

http://forums.autodesk.com/t5/NET/How-to-know-the-orientation-of-a-polyline/m-p/3784606/highlight/tr...

Gilles Chanteau
Distinguished Contributor
116 Posts
1 Kudo
Registered: ‎02-26-2009
Post 5 of 5

Re: Polyline direction (clockwise or counterclockwise)

09-11-2013 07:55 AM in reply to: _gile

Thank you Gilles.

 

Yes, that is the code i used. :smileyhappy:

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post