.NET

.NET

Reply
Distinguished Contributor
junoj
Posts: 116
Registered: ‎02-26-2009
Message 1 of 5 (1,832 Views)
Accepted Solution

Polyline direction (clockwise or counterclockwise)

1832 Views, 4 Replies
09-07-2013 11:52 PM

I am trying to set up the bulge for  a polyline, in order to set up the bulge currecty I need to know if the polyline was created clockwise or counterclockwise.

 

Any advice would be appreciated.

 

-J

Hi,

 

I just did a search for "clockwise" in this forum here ... and the second item (in the current search result) answers your question (>>>click<<<).


- alfred -

*Expert Elite*
Alfred.NESWADBA
Posts: 9,608
Registered: ‎06-29-2007
Message 2 of 5 (1,828 Views)

Re: Polyline direction (clockwise or counterclockwise)

09-08-2013 12:03 AM in reply to: junoj

Hi,

 

I just did a search for "clockwise" in this forum here ... and the second item (in the current search result) answers your question (>>>click<<<).


- alfred -

-------------------------------------------------------------------------
Alfred NESWADBA
Ingenieur Studio HOLLAUS ... www.hollaus.at
-------------------------------------------------------------------------
Distinguished Contributor
junoj
Posts: 116
Registered: ‎02-26-2009
Message 3 of 5 (1,761 Views)

Re: Polyline direction (clockwise or counterclockwise)

09-10-2013 10:09 PM in reply to: Alfred.NESWADBA

Alfred, thank you for the link.

 

I don’t think they ever solved the problem in the link, but it have a good idea. I end up using my own algorithm at the end of the day

*Expert Elite*
_gile
Posts: 2,133
Registered: ‎04-29-2006
Message 4 of 5 (1,749 Views)

Re: Polyline direction (clockwise or counterclockwise)

09-10-2013 11:25 PM in reply to: junoj

By my side, I think the algebraic area (signed area) DOES solve the problem.

Did you try the code I posted in the last repy of this thread?

http://forums.autodesk.com/t5/NET/How-to-know-the-orientation-of-a-polyline/m-p/3784606/highlight/tr...

Gilles Chanteau
Distinguished Contributor
junoj
Posts: 116
Registered: ‎02-26-2009
Message 5 of 5 (1,729 Views)

Re: Polyline direction (clockwise or counterclockwise)

09-11-2013 07:55 AM in reply to: _gile

Thank you Gilles.

 

Yes, that is the code i used. :smileyhappy:

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.