.NET

Reply
Distinguished Contributor
muckmailer
Posts: 128
Registered: ‎05-10-2009
Message 1 of 6 (497 Views)

Linking AutoCAD 2012 (64 bit) to Sharpdevelop. acmgd.dll will not run

497 Views, 5 Replies
03-30-2012 09:00 AM

I am using  SharpDevelop 3.2.1 on a USB drive.

 

I am trying to link to AutoCAD 2012 on a 64 bit machine. I have added my referance files

but when I start SharpDevelop with my program the acmgd.dll will not load. Has anyone tryed this

SharpDevelop with AutoCAD 2012 and how can I use my referance file. I would attach my image

snapshot showing my errors to this post but it appears this form

does not have that feature?

 

Thank you

*Expert Elite*
Alfred.NESWADBA
Posts: 9,378
Registered: ‎06-29-2007
Message 2 of 6 (490 Views)

Re: Linking AutoCAD 2012 (64 bit) to Sharpdevelop. acmgd.dll will not run

03-30-2012 09:36 AM in reply to: muckmailer

Hi,


>> I would attach my image snapshot showing my errors to this post but it appears this form

You can just paste the image into the text within your message, or you use the attachment-possibility (button for file-selection for an attachment just bejond the textbox you are entering the message text.

 

- alfred -

-------------------------------------------------------------------------
Alfred NESWADBA
Ingenieur Studio HOLLAUS ... www.hollaus.at
-------------------------------------------------------------------------
Distinguished Contributor
muckmailer
Posts: 128
Registered: ‎05-10-2009
Message 3 of 6 (476 Views)

Re: Linking AutoCAD 2012 (64 bit) to Sharpdevelop. acmgd.dll will not run

03-30-2012 11:15 AM in reply to: muckmailer

I would like to upload a snap shot but the image up load does not work for that forum

I have install adobie player but I am not have any options up upload my file.

Any suggestions?

Thank you,

Distinguished Contributor
muckmailer
Posts: 128
Registered: ‎05-10-2009
Message 4 of 6 (469 Views)

Re: Linking AutoCAD 2012 (64 bit) to Sharpdevelop. acmgd.dll will not run

03-30-2012 12:01 PM in reply to: muckmailer

Ok, A image of my snap shot should be attached.

Thank you,

Valued Mentor
KerryBrown
Posts: 276
Registered: ‎11-29-2008
Message 5 of 6 (448 Views)

Re: Linking AutoCAD 2012 (64 bit) to Sharpdevelop. acmgd.dll will not run

03-30-2012 02:30 PM in reply to: muckmailer

 

Just a WAG ...

Try a later version on SharpDevelop (currently 4.2 )

 

Just for info, are you using the ObjectARX SDK version of the managed assemblies for development ?

 

 

Regards

 

//-------------------------------------------------------

Everything will work just as you expect it to, unless your expectations are incorrect.

class keyThumper<T> : Lazy<T>;      another  Swamper

Distinguished Contributor
muckmailer
Posts: 128
Registered: ‎05-10-2009
Message 6 of 6 (443 Views)

Re: Linking AutoCAD 2012 (64 bit) to Sharpdevelop. acmgd.dll will not run

03-30-2012 02:57 PM in reply to: KerryBrown

Can SharpDevelop 4.2 be placed on a USB drive?  If so, what should I do to make it portable on a USB drive.

Is there a link I can download 4.2  from?

 

I have downloaded ObjectARX SDK  for 2010 and 2012 on the 64 bit machine.  The snapshot was using

the files from the 2012 ARS folder. I think I get the same results using the 2010 ARX files. Where is the best

place to choose my acdmgd.dll & acmgd.dll files for AutoCAD 2012. I was also using Jerry Winters VBA Cad Templates

to initate the programs on my 32 bit machine using VS2008 & AutoCAD 2010.  Then I would remove the

AutoCAD  acdmgd.dll & acmgd.dll files and try my program on the 64 bit machine. Then I would use sharp to

start my program without any luck.

 

I prefer to use Sharp on the 64 bit machine because it is portable on a USB drive. I don't have to go

through the MS express setups, activations, etc.  The Sharp seems to be simple unlike a MS express editions.

I thiink it would be nice to get it working with AutoCAD becuase Sharp 3.2 is a nice portable program.

 

Any suggestions.

 

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Are You Going To Be @ AU 2014? Feel free to drop by our AU topic post and share your plans, plug a class that you're teaching, or simply check out who else from the community might be in attendance. Ohh and don't forgot to stop by the Autodesk Help | Learn | Collaborate booths in the Exhibit Hall and meet our community team if you get a chance!